Repair of Cracks in Chimney with Aviation Logo Brush

Repair of Cracks in Chimney with Aviation Logo BrushHongshun Construction Engineering Co., Ltd. should clearly specify the preparation, inspection, and handover of completion drawings when signing the contract for the construction project. Before the completion acceptance of the project, the construction unit should organize, supervise and assist each design and construction unit in inspecting the completion drawing preparation work they are responsible for. If any inaccuracies or shortages are found, timely measures should be taken to modify and supplement them. If the as built drawings are inaccurate, incomplete, or do not meet the filing requirements as a condition for project handover and acceptance, they cannot be handed over for acceptance. In special circumstances, the completion drawings can also be submitted within the agreed deadline during the handover acceptance. The completion drawings for large and medium-sized construction projects and urban residential communities shall not be less than two sets, one set shall be handed over to the production and use unit for safekeeping, and the other set shall be handed over to the relevant competent department or technical archives department for safekeeping. For construction projects of special national importance (such as the Capital Airport, Nanjing Yangtze River Bridge, etc.), an additional set shall be submitted to the archives for safekeeping. The completion drawings of small-scale construction projects shall not be less than one set, and shall be handed over to the production and use units for safekeeping.

Reply 24 hours a day
The construction unit is responsible for timely providing the construction unit with additional construction drawings required for the preparation of completion drawings, and specifying the number of copies that need to be added when signing the contract. After the completion of a large-scale project, if the above-mentioned completion drawings still cannot meet the needs, a new completion drawing can be drawn, and the construction unit is responsible for organizing the force to draw it, while the design and construction units are responsible for providing engineering change information. The cost required for preparing and organizing the as built drawings, which is caused by design reasons, shall be solved by the design unit. The construction unit shall be responsible for the cost of preparing the required drawings, which shall be solved by the construction unit in the construction and installation project cost; The construction unit is responsible for compiling and replicating the costs, which shall be solved by the construction unit in the infrastructure investment; The cost of copying and supplementing after completion and use shall be borne by the user unit. In order to prepare the completion drawings of basic construction projects, each competent department may formulate relevant detailed rules according to specific circumstances. This regulation shall be implemented on a trial basis from the date of approval and promulgation. Any previous regulations that conflict with this regulation.
Follow these regulations. Construction drawing design is a stage of engineering design, following the preliminary design and technical design phases. This stage mainly expresses the designer's intentions and all design results through drawings, which serve as the basis for construction and production. It is the bridge between design and construction work. For industrial projects, it includes detailed drawings and component lists of various sub projects, detailed lists of structural components, and acceptance criteria and methods. The design of civil engineering construction drawings should form all professional design drawings, including drawing catalogs, descriptions, and necessary equipment and material lists, and prepare engineering budget books according to requirements. The construction drawing design documents should meet the needs of equipment and material procurement, non-standard equipment production, and construction. Construction drawing design is a stage of engineering design, followed by technical design, and two-stage design after preliminary design. This stage mainly expresses the designer's intentions and all design results through drawings, which serve as the basis for construction and production. It is the bridge between design and construction work.

Repair of Cracks in Chimney with Aviation Logo Brush