Principle of PPS-C020-3DF0 power lightning protection box

NegotiableUpdate on 01/14

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The principle of PPS-C020-3DF0 power lightning protection box is designed according to IEC standards. The lightning protection box is equipped with power indication, lightning protection indication, phase loss alarm, phase zero reverse connection and poor grounding alarm indication, lightning strike counter, lightning protection fuse, etc. The SPD module is composed of voltage switch type ASafe module and voltage limiting type AM module (or integrated MOV).

Product Details

Principle of PPS-C020-3DF0 power lightning protection box

This power lightning protection box is suitable for surge protection in three-phase (single-phase) power distribution systems.
10/350 impulse current Iimp15-35kA per line, 8/20 maximum discharge current Imax can reach 60-200kA.

Products, counterfeiting will be prosecuted! Number: 200420092732. X

Power lightning protection boxLightning protection failure alarm function:
The module has not been fully plugged into the alarm function
Remote monitoring function for lightning protection module failure
Lightning strike counting function
Power indicator function
Lightning protection status indication function

Principle of PPS-C020-3DF0 power lightning protection box

Product performance parameters

series	PPS-B＊＊＊
SPD port	a port
SPD category	Voltage switch type/voltage limiting type
protected mode	L-PE/N-PE
Maximum continuous operating voltage Uc	320V/385V
connecting wire	16-35mm²
Failure alarm	LED alarm/buzzer alarm

Product scope of application

Building main distribution panel
Outdoor distribution cabinet and distribution box
The environment where the distribution cabinet and distribution box have no installation location but require the installation of * level lightning protection facilities
An environment where there is no one guarding but requires the installation of lightning protection equipment with remote signaling approval at level *
An environment with * level lightning protection failure indication, alarm indication, and lightning discharge record is required