Price of automobile salt spray test room

As an important testing equipment for adaptability and reliability, the automobile salt spray test room is widely used in the automotive industry. It can detect the ability of electrophoretic coatings with different film thicknesses, different parts, and different structures to withstand accelerated salt spray tests. It can identify and analyze these parts that are prone to corrosion, and take corresponding protective measures.

Price of automobile salt spray test roombox structure

Internal box and its reinforcement material: stainless steel plate SUS316

Outer box and its reinforcement material: stainless steel plate SUS304

• Box/door insulation material: rigid polyurethane foam+glass fiber (insulation thickness is 100mm)

Box door: The door of the test box is sealed with silicone rubber strips; To prevent condensation or frosting on the edges of door frames and doors during low-temperature testing, low-voltage electric defrosting devices should be installed at the edges of door frames and doors

Salt water tank: made of imported PP board material, designed with a large salt water tank, requiring support for 48 hours

• Chamber base: The load-bearing capacity of the bottom plate is about 500KG/m ², and it is welded into a mesh frame with 8 # channel steel

Saturated air tank: stainless steel plate (SUS304), all pipes need to use thickened fluorosilicone rubber pipes

Lead test hole: Install 1 ø 50mm on the right side of the machine for external testing of power or signal lines (with a soft plug)

Observation window: size 395 × 395mm, made of multi-layer insulated tempered glass, with inner laminated conductive film for heating and defrosting, equipped with wiper blades for removing salt spray on the glass surface

Other designs: A slope should be set at the entrance, and drainage channels should be installed around the bottom of the studio

Price of automobile salt spray test roomparameter

1. Internal dimensions: 850mm × 1300mm × 600 mm (D × W × H)

2 Temperature range: Room temperature~55 ℃

Saturation cylinder: 35 ℃~70 ℃

3 Temperature deviation: ± 2 ℃

4. Temperature fluctuation: ± 0.5 ℃

5. Salt spray settling amount: 1.0-2.0ml/80cm2. h

6 Salt spray concentration: 5 ± 0.5%

7 Humidity range: ≥ 95% RH

8 spray mode: pneumatic continuous and intermittent spray

9 Air pressure: 0.2-0.4Mpa (for reference)

10 spray pressure 0.05~0.17 Mpa/cm (for reference

11 * Angle: 110-120 °

Scope of Application

1. Scope of testing

Suitable for salt spray corrosion testing of components, electronic hardware components, protective layers of metal materials, and industrial products. Of course, since it is called the automotive industry salt spray testing laboratory, it is mainly used in the automotive industry, such as salt spray corrosion testing of car bodies, chassis, engines, etc. Capable of completing neutral salt spray test, acetate salt spray test, and copper accelerated acetate salt spray test

2. Main purpose

This laboratory is mainly used in the automotive industry, such as salt spray corrosion testing of vehicle bodies, chassis, engines, etc. Of course, it can also be applied to salt spray testing of battery packs or system electronic devices.

Automotive enterprise users such as Changchun FAW Technology Center, Tianjin Automotive Technology Center, Dongfeng Motor Corporation, Hainan Automotive Research Institute, Automotive Quality Supervision Center, Automotive Lighting Testing Center, BYD in Shenzhen, BYD in Xi'an, Chery in Wuhu, Huapu in Shanghai, Tianjin Automotive Research Institute, Southeast Automobile, Changfeng Automobile, Changling Automobile in Jiangxi, Jinan Heavy Truck, Chunlan Automobile in Nanjing, Jiali Automobile in Zhejiang, Zhenjiang Automobile Manufacturing Plant in Guangzhou, Mazda in Hainan, Foton Motor in Beijing, Ouman Heavy Duty Automobile in Beijing, Haoqing Automobile in Zhejiang, Xiali Automobile in Tianjin, Zhongtong Bus in Liaocheng, Haila Lamp in Beijing, Xiaoxi Lamp in Xiaoxi, Tiansheng Lamp in Qinchuan, Tiancheng Lamp in Yangzhou, Tangcheng Lamp Factory in Yangzhou, Siemens Weidi Lamp European Automotive Electronics, Taizhou Xuanjin Automotive Lights, Wuhan Faurecia, Shanghai Faurecia Henan Hebi Tianhai Electric, Shenyang Huachen, Shenyang Tianhai Denso, Chongqing Changhua, Yantai Dongyang Electromechanical Automotive Electrical, Hubei American Standard Automotive Refrigeration, Yantai Huofu Lock Factory, Beijing Beizhong Automotive Electric, Hubei Xingqi Automotive Parts, Xiangfan Daan Automotive Testing Center, Qinhuangdao Daka Wheel Hub, Sanmenxia Daka, Wuxi Daka, Nanhai Zhongnan Wheel Hub, Qingdao 21st Century Automotive Development Company, Chongqing Futong Automotive Parts, Guangdong Weijie Automotive Decoration, Shenyang Sanhua Wheel Hub, Ningbo Yuejin Automobile, ZF Fuao Chassis, General Equipment Automotive Test Field, Chongqing Zhongnan Aluminum Alloy Wheel Hub, Ningbo Mingjia Automotive Decoration Line, Beijing Petlai Electric, Zhuzhou Xianghuoju Automotive Lighting, Sichuan Tianshi Car Mirror, Shanghai Industrial transportation electrical appliances, Nantong Youxing wiring harness.

Home appliance industry users such as Kelon, Huabao, Weili, Whirlpool, Midea, Hualing, Dongbao, HSBC, Chunlan, Meiling, Rongshida, Xiaotian'en, Boxiwei, Wuxi Panasonic Refrigeration, Zhongyi, Wanhe, Gree, Hisense, Haier, Okoma, Xinfei, Konka, Oakes, Xinke, Shangling Tian'an, Fenghua, as well as small home appliance enterprises such as Wanhe, Galanz, Kangbao, Shenzhou, Supor, Shuaikang, and Huadi; Foreign manufacturers such as Siemens LG、 Panasonic, Sharp, Samsung, etc; The Home Appliance Testing Center: Guangzhou Electric Appliance Science Research Institute and China National Institute of Electrical Appliances (Beijing Institute) are both clients of our company. The diesel engine industry includes Dalian Diesel Engine, Yulin Diesel Engine, Wuxi Diesel Engine, Xinchang Diesel Engine, Changzhou Diesel Engine Factory, Beijing Butelai Electric, Dongfeng Motor Electric, and Guizhou Zhenhua.
Salt spray test chamber *, manufacturer of salt spray test chamber