Price of Shangtai PH electrode PT4805-60, Suntex, PT4805-60

Price of Shangtai PH electrode PT4805-60, Suntex, PT4805-60

At present, the electrodes used in the laboratory are composite electrodes, which have the advantages of being easy to use, not affected by oxidizing or reducing substances, and having a fast equilibrium speed. When in use, remove the rubber sleeve on the electrode filling port and the rubber sleeve at the bottom to maintain the hydraulic pressure difference of the solution inside the electrode. Below is a brief introduction to the use and maintenance of electrodes:
When the composite electrode is not in use, it can be fully immersed in a 3M solution. Do not soak in detergent or other absorbent reagents.
2. Before use, check the bulb at the front end of the glass electrode. Under normal circumstances, the electrode should be transparent and free of cracks; The bubble should be filled with solution and there should be no bubbles present.
When measuring solutions with high concentrations, try to shorten the measurement time as much as possible, clean carefully after use, and prevent the measured liquid from adhering to the electrode and contaminating it.
After cleaning the electrode, do not wipe the glass film with filter paper, but use filter paper to absorb dry to avoid damaging the glass film, preventing cross contamination, and affecting measurement accuracy.
5. During measurement, pay attention to the silver chloride internal reference electrode of the electrode, which should be immersed in the chloride buffer solution inside the bulb to avoid the phenomenon of digital jumping in the display part of the meter. When using, be careful to gently shake the electrode a few times.
The electrode cannot be used for strong acids, strong bases, or other corrosive solutions.
7. It is strictly prohibited to use in dehydrated media such as anhydrous ethanol, potassium dichromate, etc.
1. Storage of pH glass electrode
Short term: stored in a buffer solution with pH=4;
Long term: stored in a buffer solution with pH=7.
2. Cleaning of pH glass electrode
The contamination of glass electrode bubbles may prolong the electrode response time. Use CCl4 or soap solution to wipe away dirt, then immerse in distilled water for one day and night before continuing to use. When pollution is severe, soak in 5% HF solution for 10-20 minutes, rinse immediately with water, and then immerse in 0.1N HCl solution for one day and night before continuing to use.

Price of Shangtai PH electrode PT4805-60, Suntex, PT4805-60

Shangtai ORP electrode PT4805-60 PT4805-60-p-pa-k19/120/3m
Redox electrodes, also known as ORP electrodes, are used for measuring ORP values in general wastewater treatment.
Specifications:
Pressure resistance: normal pressure (about 0-0.5bar)
Temperature: 0-80 degrees
Applicable protective device: Immersion electrode protection device with a length of 0.5-3M

List of commonly used products of Taiwan, China Shangtai:
PH Series: Online PH Meter PC-350, Online PH Meter PC-3110, Online PH Controller PC-3100, PH Controller PC-310, PC-320 Online Controller, etc.
Portable series SP-2300PH analyzer,
SP2500 acidity ion concentration analyzer, Shangtai TS-100, Shangtai TS-130, etc.
Conductivity series: EC-410 conductivity meter, online conductivity controller EC-430, EC-4100 microcomputer conductivity controller, EC-4110 online conductivity meter, SC-110 portable conductivity meter, SC-2300 laboratory desktop conductivity tester, etc.

At the beginning of its establishment, Shangtai targeted various public and private universities and research institutions as its main customers. At that time, the chemistry laboratories of various universities used SUNTEX brand pH meters, which guaranteed the quality of our company's products. Up to now, the pH controller and conductivity controller of Shangtai Company have become well-known in the market. These controllers, which operate continuously throughout the year, have seen a continuous increase in sales volume. This not only proves the excellent quality of Shangtai's products, but also represents customers' recognition of our company's after-sales service.
The model of Shangtai PH meter;
PH-3310,PC-3110,PC-3100,pc-110,pc-100,SP-2100,SP-2300,SP-2500,ts-1,ts-100，ts-110，ts-130（: http://www.xinsong1718 .. Com/) Taiwan, China Shangtai National Primary Agent:
Shangtai conductivity meter model:
EC-4300,EC-4110,EC-410,EC-430,SC-110,sc-2300
Shangtai dissolved oxygen analyzer:
DC-5110 DC-5300
Shangtai residual chlorine detector:
CT-6110-POL CT-6300
Shangtai turbidity meter:
TC-7100，TC-7200
Shangtai ion concentration meter:
IT-8100

National first-class agent of Shangtai, Taiwan, China, China:

Shanghai Xinsong Industrial
：