Phoenix isolation transmitter MCR-C-UI-UI-450-DCI

Phoenix isolation transmitter MCR-C-UI-UI-450-DCI- 2810887
MCR three terminal isolated amplifier, input/output configurable, used for electrical isolation of analog signals, limit frequency (3dB) 450Hz, pre configured. For information on available signal combinations, please refer to the data manual.

size

Width 17.5mm
Height 99 mm
Depth 114.5 mm
Back to top
environmental conditions

Environmental temperature (operating) -20 ° C... 65 ° C
Back to top
Input data

Input quantity 1
Configurable/Programmable Yes, pre configured
Voltage input signal 0 V... 10 V (if there are any different parameter setting requirements, please indicate them when ordering)
The maximum input voltage is 30V
Maximum input current of 50 mA
Input resistance of 1 M Ω for input voltage
The input resistance of the input current is 50 Ω
Back to top
output data

Phoenix isolation transmitter MCR-C-UI-UI-450-DCI- 2810887

Output quantity 1
Configurable/Programmable Yes, pre configured
Voltage output signal 0 V... 10 V (if there are any different parameter setting requirements, please indicate them when ordering)
The maximum output voltage is 15V
Maximum output current of 30 mA
Load/output load voltage output ≥ 10 k Ω
Load/Output Load current output ≤ 500 Ω
Back to top
power supply

Power supply voltage range 18 V DC... 30 V DC
Maximum current consumption<30 mA (no load)
Back to top
Wiring data

Connection method: pluggable screw connection
Rigid wire with a minimum cross-sectional area of 0.2 mm ²
Rigid wire with the largest cross-section of 2.5 mm ²
Zui small wire cross-sectional AWG 24
Zui Large Wire Cross Section AWG 14
Flexible wire with the smallest cross-section of 0.2 mm ²
Flexible wire with the largest cross-section of 2.5 mm ²
Stripping length 8 mm
Thread M3
Back to top
Overview

Number of channels 1
Maximum transmission error ≤ 0.1% (final value)
The maximum temperature coefficient is 0.0075%/K
Cut off frequency (3dB) 450 Hz
Zero adjustment ± 2%
Range adjustment ± 2%
Step response (10-90%) 0.8 ms
Protection circuit transient protection
Test voltage, input/output 1.5 kV (50Hz, 1min)
Test voltage power supply/signal 1 kV (50Hz, 1min)
Electromagnetic compatibility complies with the Electromagnetic Compatibility Directive
Emission interference EN 61000-6-4
Anti interference EN 61000-6-2
Color Green
Non reinforced polyamide PA shell material
Installation location is arbitrary
Compliance with CE standards

- 2810887