Welcome Customer !

Membership

Help

Changzhou Jintan Boko Test Equipment
Custom manufacturer

Main Products:

mechb2b>Products

Organizational crushing homogenizer

NegotiableUpdate on 03/06
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
This machine is used for scientific research, medical treatment, chemical products, food processing, etc. to crush biochemical, plant, and nutrient experiments. $r$n
Product Details

1FK-A tissue crushing homogenizerSpecifications
1. Output power: 200W
2. Rated voltage: 220V
3. Rated frequency: 50HZ
4. Load speed: 10000-12000 revolutions per minute
5. Weight: 7.5 kilograms
6. Dimensions: 45 × 32 × 22 cm

IIFK-A tissue crushing homogenizerPurpose:
This machine is used for scientific research, medical treatment, chemical products, food processing, etc. to crush biochemical, plant, and nutrient experiments.

IIIFK-AConstruction
1. It mainly consists of three parts: electric motor, stainless steel container, and machine base.
2. This machine adopts a motor shaft connected to the cutter shaft through a coupling, which is concentric.

4FK-AUsage and maintenance
1. Aim the knife at the machine shaft, connect the elastic element of the coupling to the groove of the ruler, and center it in the circular hole of the container cover before starting the motor.
2. The particles should be slowly poured into the container, starting with slow speed (1) and then fast speed (2). But slow speed can only serve as a starting point and should not be used frequently.
3. Due to the high-speed operation of the motor, it cannot be used for a long time. It must be used every three minutes and rested for five minutes before continuing to be used.
4. Changing the cup or changing the knife shaft will change the closing height. At this time, the motor needs to be adjusted by loosening the screw with an Allen wrench, adjusting the motor to a reasonable height, and then tightening the screw. Under normal circumstances, the motor does not need to be adjusted.
5. If serious sparks or sudden braking occur during use, the use must be immediately stopped, the cause checked, and even repaired.
6. This machine is not suitable for crushing substances with high viscosity and hard materials (such as bones, stones, etc.).
  Boko Testing Equipment Research Institute specializes in productionUV test chamber Programmable constant temperature and humidity chamber Drip test device Swing rod rain shower device Ultra low temperature constant temperature bath High and low temperature impact test chamber Water bath constant temperature oscillator High and low temperature test chamber Constant temperature centrifuge Low temperature thermostat Artificial climate test chamber Low temperature thermostat Low temperature constant temperature centrifuge Salt spray corrosion test chamber High temperature constant temperature oil bath Salt spray corrosion test chamberHumidity Chamber Small freeze dryer Electric heating plate, high-temperature anti-corrosion electric heating plate, flip oscillator, constant temperature shaker, low-temperature shaker