optical image combinator

Optical combiner, combiner level, and level are used to measure the inclination of planes and columns in the horizontal direction, as well as the flatness, straightness, and accuracy of the installation position of machine tools and optical mechanical instruments' guides or machine bases. The optical combiner is mainly composed of micro motion screws, nuts, dials, levels, prisms, magnifying glasses, levers, and bases with flat and V-shaped working surfaces.

The structure of an optical combiner: The optical combiner mainly consists of a micro motion screw, nut, dial, level, prism, magnifying glass, lever, and a flat surfaceVThe base and other main components of the working face are composed of.

The working principle of an optical camera: The optical camera uses a prism to amplify the gas vapor image in the level to improve the reading accuracy, and uses a lever and micro motion screw transmission mechanism to improve the sensitivity of the reading. So the measured object is tilted0.01mm/Meter time, can be read out in the camera. (In harmony)levelThe middle level mainly serves to indicate zero

（1）Scale division value-----0.01mm/rice

（2）_Measurement range-----0-10mm/rice

（3）Indication error

±1mm/Within a range of meters-----±0.01mm/rice

Within the entire measurement range-----±0.02mm/rice

（4）Deviation in the flatness of the working face-----0.003mm

（5）Level gauge grid value-----0.1mm/rice

（6）Working face (long)*Wide)-----165*48mm