Multi effect evaporator for high salt wastewater

Product Introduction:　　
The ZFQ multi effect evaporator uses the falling film evaporation principle to heat and boil dilute solutions, causing some of the water to vaporize and achieve the purpose of concentrating the solution. This unit adopts a continuous production process. It has the advantages of high concentration ratio (1/5-1/10), wide viscosity range (<400CP), good heat transfer effect, and large processing capacity. It is suitable for the evaporation of heat sensitive, high concentration, high viscosity, and corrosive materials.
The ZFQ multi effect evaporator group has a large heat transfer coefficient and requires a small temperature difference for heat transfer. Depending on the properties of the evaporated material and the evaporation target, it can be combined into double effect, three effect, four effect, and five effect evaporation systems. It can also use waste steam from the top of the tube bundle or disc dryer and other low calorific value heat sources (such as condensed water vapor) as the evaporator heat source to become a waste heat evaporator, which can greatly reduce the amount of steam used and achieve energy-saving effects. When there is sufficient supply of waste heat steam, there is no need to produce steam at all, which can achieve significant economic benefits.
This machine is suitable for corn syrup in the starch industry; Juice and flavored semen in the food industry; Milk products in the dairy industry; Sugar liquids in the sugar industry; Concentrate industry products such as citric acid, itaconic acid, and alcohol waste liquid in the fermentation industry.
Technical parameters: