-
E-mail
w21885188@163.com
-
Phone
13861104638
-
Address
No. 36 Fanhua Road, Hetou Industrial Park, Jintan Economic Development Zone
Product Categories
Jintan Kejie Instrument Factory
Mould Cultivation Cabinet
NegotiableUpdate on 01/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The MJ-200 mold incubator is suitable for scientific research, university experiments, and production departments such as environmental protection, health and epidemic prevention, agriculture and animal husbandry, drug testing, and aquaculture. It is a constant temperature equipment for water analysis and BOD determination of bacteria, molds, and microorganisms cultivation, preservation, plant cultivation, and breeding experiments.
Product Details
1、 MJ-200 Mold IncubatorPurpose of use
The MJ-200 mold incubator product is a constant temperature cultivation device for bacterial, fungal, and microbial cultivation and breeding experiments. It can be widely used in water analysis, BOD determination, health and epidemic prevention, agricultural and forestry science, environmental protection, blood products, drug storage, and other departments, especially for precision cultivation of sensitive organisms.
II MJ-200Characteristics of
1. Microcomputer control with LED dual digital display, providing * temperature control accuracy.
2. Modular refrigeration device, equipped with delayed start, easy maintenance, and fast temperature rise and fall. Independent over temperature protection device and working status prompt, safer and more reliable to use.
3. Three layer hollow large viewing angle external observation window, built-in ultraviolet sterilization lamp, good insulation performance.
4. Mirror stainless steel, adjustable spacing shelf, easy to clean and use.
5. It has programming parameter storage, memory, and automatic power on function for incoming calls, ensuring measurement and control
Continuity of work.
6.1-9999 minute timed shutdown function, suitable for timed cultivation.
The large circulation air duct design of 7. * can ensure high temperature uniformity.
8. Optional fluorine free green and environmentally friendly refrigeration units that meet environmental requirements.
4 MJ-200Normal working conditions
1. Environmental temperature: 10-30 ℃
2. There is no strong vibration source or corrosive gas present around the incubator.
MJ-200 should avoid direct sunlight exposure or the influence of other cold and heat sources.Relative ambient temperature: less than 70% RH
4. Power supply voltage: 220V ± 10%, frequency 50Hz, capacity not less than 1KW.
5. The power socket must be reliably grounded.
6. There should be at least 15cm of heat dissipation space at the rear of the incubator.
III MJ-200Main technical indicators
Model number technical indicators MJ-80 MJ-150 MJ-200 MJ-250 Nominal volume 80L Temperature control range 5—50℃ 5—50℃ 5—50℃ 5—50℃ Temperature fluctuation ±0.5℃ ±0.5℃ ±0.5℃ ±0.5℃ Temperature uniformity ±1℃ ±1℃ ±1℃ ±1℃ Refrigerant R-134a R-134a R-134a R-134a Rated power When heated 200W 200W 200W During refrigeration 185W Working power supply 220V±10％50HZ Studio size (mm) 400×350×500 Dimensions (mm) 530×560×1080 Load shelf two pieces
150L 200L 250L resolution ±0.1℃ ±0.1℃ ±0.1℃ ±0.1℃ timing range 1-9999minute 150W 240W 270W 270W 220V±10％50HZ 220V±10％50HZ 220V±10％50HZ 440×420×870 480×450×930 500×470×1065 54×58×133 58×61×140 60×63×153
three pieces Four pieces Four pieces
