Mould Cultivation Cabinet

The MJ-80B mold incubator is suitable for environmental protection, hygiene and epidemic prevention, agriculture and animal husbandry, drug testing, aquaculture and other scientific research, university experiments and production departments. It is a constant temperature equipment for water analysis and BOD determination of bacteria, molds and microorganisms, cultivation and preservation of plants, breeding experiments, etc

1MJ-80B mold incubatorPurpose of use
The MJ-80B mold incubator product is a constant temperature cultivation device for bacterial, fungal, and microbial cultivation and breeding experiments. It can be widely used in water analysis, BOD determination, health and epidemic prevention, agricultural and forestry science, environmental protection, blood products, drug storage, and other departments, especially for precision cultivation of sensitive organisms.
IIMJ-80BCharacteristics of
1. The temperature control system adopts microcomputer microcontroller technology, with high temperature control accuracy;
2. The inner lining is made of mirror stainless steel material; The body shell is treated with spray coating, and the overall appearance of the machine is beautiful and generous
3. The studio is equipped with lighting fixtures such as ultraviolet sterilization lamps and large angle insulated vacuum tempered glass for easy observation;
4. It has temperature and time adjustment control, touch mode keyboard setting adjustment;
5. It is displayed as a dual screen high brightness digital tube display, with accurate and intuitive readings and * performance;
6. It has timing and loop timing functions;
7. The height of the shelves in the studio can be adjusted according to user requirements;
8. The humidity sensor adopts imported components, the humidification part adopts intelligent atomizer, and the large capacity humidification water tank.

IIIMJ-80BMain technical indicators

Model number technical indicators		MJ-80B	MJ-150B	MJ-200B	MJ-250B
Nominal volume		80L	150L	200L	250L
Temperature control range		Non humidifying: 5-50 ℃	Non humidifying: 5-50 ℃	Non humidifying: 5-50 ℃	Non humidifying: 5-50 ℃
		Humidification: 10-45 ℃	Humidification: 10-45 ℃	Humidification: 10-45 ℃	Humidification: 10-45 ℃
resolution		±0.1℃	±0.1℃	±0.1℃	±0.1℃
Temperature fluctuation		±1℃	±1℃	±1℃	±1℃
Temperature uniformity		±1℃	±1℃	±1℃	±1℃
Humidity control range		(50-90)% RH depends on temperature	（50～90）%RH depends on temperature	（50～90）%RH depends on temperature	（50～90）%RH depends on temperature
Humidity fluctuations		Humidification: ≤ 8% RH	Humidification: ≤ 8% RH	Humidification: ≤ 8% RH	Humidification: ≤ 8% RH
timing range		1-9999minute
Refrigerant		R-134a	R-134a	R-134a	R-134a
Rated power	When heated	150W	200W	200W	200W
	During refrigeration	185W	240W	270W	270W
Working power supply		220V±10％50HZ	220V±10％50HZ	220V±10％50HZ	220V±10％50HZ
Studio size (mm)		400×350×500	440×420×870	480×450×930	500×470×1065
Dimensions (mm)		530×560×1080	54×58×133	58×61×140	60×63×153
Load shelf		two pieces	three pieces	Four pieces	Four pieces

4MJ-80BNormal working conditions
1. Environmental temperature: 10-30 ℃
2. Relative ambient temperature: less than 70% RH
3. Power supply voltage: 220V ± 10%, frequency 50Hz, capacity not less than 1KW.
4. The power socket must be reliably grounded.
5. There is no strong vibration source or corrosive gas present around the incubator.
6. The incubator should avoid direct sunlight or the influence of other cold and heat sources.
7. MJ-80B should have a heat dissipation space of at least 15cm at the rear.