Minolta LS-100 Brightness Meter from Japan

Beijing Huayi Tongtai Technology Co., Ltd. specializes in the sales of imported analytical and testing instruments. We provide a wide range of products, competitive prices, and excellent after-sales service.

can pass throughRS-232CRealize bidirectional communication. passRS-232Standard equipment for interfaces, capable of outputting measurement data and computer control.

Minolta JapanLS-100luminance meterProduct Introduction:

measurementCRT、LED、ELWaiting for Huidegree

Measurement of road lighting and tunnel lighting
Identification of measuring railway systems
Measure the markings of motor vehicle lanes and airport systems.
Measurement of general lighting, outdoor billboards, etc
Measurement of luminous parts of various lighting facilities and appliances
Various research and measurement experiments
Measure the brightness of various measuring instruments
The optical system adopts a single lens reflex non expanding tube body.
When measuring, use a single lens reflex method with no deviation between the actual measurement field and the measurement field inside the viewfinder. Only measuring within the measurement range can avoid the influence of light sources outside the measurement range on the optical system of non expanded tube bodies.
It is a point based measurement that can capture small parts.LS-100The measurement angle is1°，LS-100The measurable diameter is1.3mmIt can input color correction coefficients and has a wide measurement range. As an arbitrary calibration mode, users can implement precise brightness management by inputting any calibration benchmark that can be recalibrated on a separate standard brightness, or by inputting a color modification coefficient that modifies the indication difference to a specific light source, using multiple brightness meters in an error free state.
Can perform brightness ratio measurement and peak measurement. The measurement values can be selected according to different usage purposes, including instantaneous brightness value, peak brightness value, and brightness ratio.
can pass throughRS-232CRealize bidirectional communication. passRS-232Standard equipment for interfaces, capable of outputting measurement data and computer control.
Small and lightweight design, with a power supply of1section9VStacked dry batteries.(Can be accessed from a data printerDP-10Provide power supply