Masterflex I/P Easy-Load泵头 77602-00 77602-10 77601-60 77602-80

NegotiableUpdate on 02/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Quick and convenient replacement of pump tubing - only a few seconds ■ Compatible with multiple sizes of pump tubing, more flexible to use ■ Automatic positioning of pump tubing, no need for operator adjustment, easy to install ■ Quick replacement of pump tubing, minimizing downtime ■ ATEX Zone 2 certified model 77601-80; Achieve EEx II 3 G c II C T6 level

Product Details

Masterflex^®I/P^®Easy-Load^®pump head

Quickly and conveniently replace pump tubing - in just a few seconds

Compatible with multiple sizes of pump tubing, making it more flexible to use

Pump tube automatic positioning, no need for operator adjustment, easy to install

Quickly replace pump tubing to minimize downtime

ATEX Zone 2 certified model 77601-80; Achieve EEx II 3 G c II C T6 level

An eccentric wheel is connected to the pump tube automatic locator inside the Easy Load pump head, and the housing is sturdy and resistant to chemical corrosion. Through this design, the pump tube can be quickly and conveniently replaced without the need to remove the pump head from the driver. The built-in pump tube guide device ensures that the pump tube is installed in the optimal position, thereby exerting the best performance and maximizing the service life of the pump tube. The spring pump tube retainer automatically ensures the safe fixation of the pump tube, extends the service life of the pump tube, and ensures that all sizes of pump tubes can perform at their best. By adjusting the degree of bite "compression" to achieve maximum pressure or longest service life.

PSF casing, CRS or SS rotor, PPS casing, SS rotor pump head optional. PSF is more economical, while PPS has better chemical resistance. The SS rotor is equipped with PTFE sealed bearings, which have the advantages of long service life and low maintenance; The CRS rotor is equipped with Buna N wrapped bearings.

Two pump heads can be installed on the same driver using a dual channel component. Please refer to the ordering information below.

Random equipment: single channel installation components, spare handle foot covers, can be used to reduce operating noise and extend working life.

Parameters and ordering information:

Pump tube size	Flow rate per revolution mL	Flow rate (LPM) (at specified speed)			Maximum system pressure (bar)	Easy Load pump head^†
						PSF shell		PPS shell	Certified by ATEX; PSF shell
		100	540	1 ~ 650		CRS rotor	SS rotor	SS rotor	SS rotor
I/P 26	6.2	0.6	3.3	0.01 ~ 4.0	2.7	77602-00	77602-10	77601-60	77602-80
I/P 73	12.3	1.2	6.6	0.01 ~ 8.0
I/P 82	20.0	2.0	10.8	0.02 ~ 13.0	1.4

† PSF=polysulfone PPS=polyphenylene sulfide CRS=cold-rolled steel SS=stainless steel

77601-95 spare single pump head installation component, made of stainless steel material

77601-96 is a dual channel installation component used for stacking dual pump heads, made of stainless steel material

77600-03 spare handle foot cover. 10 pieces/pack.

For more Masterflex peristaltic pump models and information, please contact us:

Tel:

Fax:-812

E-mail: info@merseylab.com