Manual image measuring instrument | anime measuring instrument | two-dimensional optical measuring instrument

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

This machine is a precision optical non-contact dimension measuring instrument that integrates optics, precision machinery, and electronic measurement technology. By adjusting the lens magnification, the workpiece to be measured is magnified by the corresponding factor, and the upper and lower light sources are adjusted. The magnified workpiece image is transmitted to the computer, and after a series of functional processing by computer software, the contour, surface shape, size, angle, and position of complex workpieces are measured, as well as micro inspection and reverse engineering design of precision components. Widely used in fields such as electronics and electrical appliances, cutting fixtures, precision parts, spring hardware, plastic products, stamping parts, molds, mechanical processing, and scientific research.

Product Details

■Instrument Features

Granite base and column, mechanism deformation
X/YThe shaft is equipped with a high-precision grating ruler for precise positioning
High definition colorCCDcameraPaired with a continuous zoom lens
Laser pointer locator, precise measurement of position
Both the bottom light and surface light are cold light sources with adjustable brightness
Basic measurements such as points, lines, circles, arcs, angles, distances, etc. are easy to take
Automatically capture the center, quadrant points, line endpoints, and midpoints within the geometric region
Can analyze straightness, roundness, concentricity, parallelism, angles, etc. within a plane
can be performed2DScanning of contour boundary points, directly fitting into lines, circles, arcs, etc
The software has functions such as coordinate translation, rotation, and alignment
Graphics and data can be converted todxfThebmpThejpgThedocThexlsWaiting format
Can provide tolerance analysis and outputSPCControl chart, process capability index, etc

■configuration selection

RenishawContact probe, combined with specialized measurement software, can test the inclined surface, circle, groove, column, ball, cone, blind hole, height, etc. on three-dimensional workpieces.

■Specifications

instrumentmodel	SZ-VMS1510	SZ-VMS2010	SZ-VMS3020	SZ-VMS4030	SZ-VMS5040
measurementitinerary	X150×Y100 ×Z150mm	X200×Y100 ×Z150mm	X300×Y200 ×Z150mm	X400×Y300 ×Z150mm	X500×Y400 ×Z150mm
Operation method	Manual, switchable for quick movement
measurement accuracy	XTheYaxisE₂=(3+L/200)µm LFor the measured length, unit:mm
repeatability accuracy	XTheYaxis≤3µm
frame structure	Cantilever, granite base and column
Transmission method	Toothless screw drive
Light source system	LEDCold light source, manually controlled
imaging system	43Ten thousand pixels1/3Colorcamera
Zoom objective lens	Continuous zoom lens
magnification	Optical magnification:0.7～4.5×Image magnification:28～180×
encoder	Linear grating ruler
Grating ruler resolution	1µm
Software output	WordTheExcelTheAutoCADTheSPC
load-bearing	25kg
host size	W1000×D550 ×H1650mm	W1100×D650 ×H1650mm	W1200×D750 ×H1650mm	W1300×D850 ×H1650mm	W1500×D1500 ×H1800mm
host weight	180kg	200kg	220kg	240kg	300kg
Power requirements	1∮AC110/220V 50/60HZ 240W