MPA580 German CK Skin Elasticity Tester MPA580 General Agent

【 Name 】: MPA580 German CK Skin Elasticity Tester MPA580 General Agent
[Model]: MPA580
Brand: German CK Skin Elasticity Tester MPA580
【 Search keywords 】: German CK skin elasticity tester MPA580, CK skin elasticity tester MPA580

GermanyCKCompany skin elasticity testerMPA580

1、 Principles of Skin Elasticity Testing
The testing principle is based on the principles of suction and stretching. A negative pressure is generated on the surface of the tested skin to suck it into a specific testing probe. The depth of the skin being sucked into the testing probe is measured through a non-contact optical testing system. The test probe includes an emitter and a receiver of light, and the ratio of light (the ratio of emitted light to received light) is proportional to the depth of the skin being inhaled. Then, the elasticity performance of the skin is determined through MPA software analysis.

II Parameters and curves of elasticity tester
Uf=Ue+Uv Uf - Skin stretching amount Ue - Elastic part stretching amount
Uv=Uf Ue is the viscoelastic or plastic part of the skin
Regarding parameter settings: Negative pressure range (20-500) mbar, * use 450mbar. The parameters such as the time for constant negative pressure, the time for canceling negative pressure, and the number of repetitions in continuous measurement can be set by the user themselves.

3、 The elasticity tester has MPA 9 functionality
The MPA system is a multifunctional analysis system that can also connect multiple probes, each with a different analysis window. The connected probes include: Corneometer CM825 (moisture testing probe), Sebumeter (oil testing probe), Skin PH Meter PH905 (acidity and alkalinity testing probe), Mexamter MX18 (pigment testing probe), Tewameter TM300 (moisture loss testing probe), Reviscometer RV600 (elastic fiber tissue testing probe), and Temperature&Rel. Air humidity (environmental temperature and humidity testing probe). Users can choose products suitable for their own research and development based on the different research subjects.

4、 Main technical indicators
1. Dimensions: 27 × 25.5 × 7cm, probe: Φ 2 × 10cm 6. Power supply: 100~240V/50-60Hz/0.3A
2. Probe test hole diameter: 2mm, 4mm, 6mm, 8mm. 7. Interface: USB port
3. Pressure: (20-500) mbar 8. Test negative pressure mode: four types
4. Test time: (0.1-60) seconds 9. Curve display mode: 1) Stretching length - Schedule 2) Negative pressure - Stretching length
5. Accuracy: Approximately 3% penetration depth above 100um, no linearity below 100um. 10. Weight: 3.2Kg

'