LZ series metal float flowmeter

Product features: Shanghai Xuanxu Instrument LZ series metal float flowmeter is suitable for measuring small caliber and low flow medium flow rate; Reliable work, minimal maintenance, and long lifespan; For straight pipe sections, the requirements are not high; A wider flow ratio of 10:1;

Detailed information on LZ series metal float flowmeter:

Shanghai Xuanxu Electric LZ series metal float flowmeter

The LZ series metal float flowmeter is suitable for measuring the flow rate of small caliber and low velocity media; Reliable work, minimal maintenance, and long lifespan; For straight pipe sections, the requirements are not high; A wider flow ratio of 10:1; Dual row large LCD display, optional on-site instantaneous/cumulative flow display, with backlight single axis sensitive indication; Non contact magnetic coupling transmission; All metal structure, suitable for high temperature, high pressure, and highly corrosive media; Can be used in flammable and explosive hazardous environments; Optional two-wire system, battery, and AC power supply methods; Multi parameter calibration function; Equipped with data recovery, data backup, and power down protection functions

Technical Specifications

Measurement range: Water (20 ℃) 1-200000 l/h

Air (20 ℃, 0.1013MPa) 0.03-4000m3/h

Refer to the flow chart, special flow rates can be customized

Range ratio: Standard 10:1 Special 20:1

Accuracy: Standard Type 1.5 Special Type 1.0

Pressure rating: Standard type: DN15-DN50 4.0MPa DN80-DN200 1.6MPa

Special type: DN15-DN50 25MPa DN80-DN200 16MPa

The pressure rating of the jacket is 1.6MPa

Special types should be negotiated with the factory before selection and ordering

Pressure loss: 7kPa-70kPa

Medium temperature: Standard type: -80 ℃ -+200 ℃: PTFE: 0 ℃ -85 ℃

High temperature type: very high up to 400 ℃

Medium viscosity: DN15:<5mPa. s (F15.1-F15.3) 30mPa. s (F15.4-F15.8)

DN25:<250mPFa.s

DN50-DN150:<300mPa. s

Environmental temperature: LCD type -30 ℃ -+85 ℃

Pointer type -40 ℃ -+120 ℃

Connection form: Standard type: DIN2501 standard flange

Special type: Any standard flange or thread specified by the user

Cable interface: M20 * 1.5

Power supply: Standard 24VDC two-wire 4-20mA (10.8VDC-36VDC)

Communication type: 85-265VAC 50HZ

Alarm output: upper or lower limit instantaneous flow alarm

Standard type: open collector output

Special type: relay output, pulse output: cumulative pulse output, very small interval of 50 milliseconds

LCD display: instantaneous flow display value range: 0-50000

Accumulated traffic display value range: 0-

Protection level: IP65

Model Description
LZ－□－□－□－□－□－□

Diameter and flow range of flowmeter

The flow rate indicated in the table is a large flow rate with a range of 10:1. For example, for a 15mm caliber, the flow rate for a very small range is 0.0025-0.025 cubic meters per hour;

Note: The gas flow rate is the flow rate under standard conditions (pressure 760mmHg, temperature 20 ℃)

For small caliber microflow type metal rotor flow meters, there is no need to consider the requirements for the front and rear straight pipe sections.