- Phone
-
Address
No. 22 Minghui Road, Beizhakou Industrial Park, Jinnan District, Tianjin City
Product Categories
Tianjin Liangqi Electronic Technology Co., Ltd
LK-8201 Wire and Cable Bending Tester
NegotiableUpdate on 01/31
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
LK-8201 Wire and Cable Bending Tester
Product Details
Product Introduction
satisfyGB5023.2、GB5013.2、IEC60227-2、IEC60245-2、UL1581、VDE0472、HD22.1Waiting for standards
Take the test piece approximately5mWrap the middle section around two circular wheels of the specified diameter, apply a load to both ends of the specimen, and connect the current. Then0.33m/sThe speed,
1mMove the circular wheel to make the specimen bend and stretch back and forth. When the wire breaks or reaches the set number of times, it will automatically stop and the test piece will be removed to evaluate its resistance to bending
Scratching characteristics.
|
loadLoad |
1 / 1.5 / 2 kg ×every4individual |
|
Test CurrentTesting current |
AC 220V / 1.0～35A；AC 380C / 3.0～35A |
|
testing voltageTesting voltage |
1∮, AC 220V,60Hz or 3∮,AC 380V,60Hz |
|
Flexible pulleywheel |
Φ60 / 80 / 120 / 160 / 200 mmOne set each |
|
Bending strokespce |
1000 ± 20mm |
|
Bending speedspeed |
0.33 ± 0.05 m/s (constant speed) |
|
counterCounter |
Electronic,6Number of digits, reaching the set number of times, automatic shutdown |
|
volumeDimension(W×D×H) |
188×53×150cm |
|
weightWeight |
250kg |
|
power supplyPower |
1∮, AC220V,35A |
|
state |
Result judgment |
|
|
report
guard against |
ACore lampBCore lampCThe voltage light of the core lamp is on, and the machine is stopped. |
The number of times has reached the set limit. |
|
Do not stop the machine. |
There may be a phenomenon of current overload (>30A），
Observe the current values and make corresponding adjustments. |
|
|
The number of times has not reached, butA、B、CThe light on the chip has turned off and the machine has stopped. |
Perhaps a certain core has been broken, indicating an open circuit phenomenon. |
|
|
The number of times has not reached, but the voltage indicator light is off and the machine is stopped. |
The core wire may have short circuited. |
|
Explanation: Other specifications of weights and pulleys can be customized.
