LCR40 Passive Components and DCA55 Semiconductor Component Analyzer

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

LCR40 passive components can be freely connected to DCA55 semiconductor component analyzer $r $n kit $r $n. $r $n Automatic component type recognition. $r $n automatic pin recognition. Measurement of gain of $r $n transistor. $r $nMOSFET gate threshold measurement. Measurement of nPN junction characteristics. $r $n leakage current measurement. $r $n automatically turns on and off. $r $n ultra-thin and compact design.

Product Details

Package set, LCR40 Passive Components and DCA55 Semiconductor Component Analyzer, ATC55 shell

Any connection.
Automatic component type
distinguish.
Automatic pin recognition.
Measurement of transistor gain.
MOSFET gate threshold
Measurement.
PN junction characteristics
Measurement.
Leakage current measurement.
Automatic startup and shutdown.
Ultra thin and compact design.
feature
Support parts
smart
convenient
accurate
Transistors (germanium and silicon).
Darlington.
MOSFET。
Junction FET (only the gate pin is recognized).
Low power thyristors and bidirectional thyristors.
LED (including dual color type).
Diodes and diode networks.

easy to use
flexible
This is a type of * instrument
Greatly simplified
Passive components.
The traditional LCR bridge is
Essentially, it is complex and time-consuming
Consumption and usage.
Everything that needs to be done
Automatic, it tells you
Component types other than component value data.
In addition, automatic signal selection
The level and frequency of the specific component being tested.
Just clip the universal test cable onto your component and press the test button. Within a few seconds
Identify the type of component (inductor, capacitor, or resistor) and the main value of the component.
In addition, other component data will also be displayed, such as the DC resistance of the inductor.
Automatically select the testing frequency to suit the tested component, and
Scrollable display.
Comes with our new universal 2mm connector, including a pair of gold hook shaped probes.
The 2mm plug is compatible with many probe types, including our improved SMD tweezers and Crocs.
Other accessories are also available, such as padded suitcases, spare batteries, etc.

Model: LCR40
Ah * LCR
Passive component analyzer
Product Introduction
Notes:
1. Valid within 12 months of factory calibration.
Proof of comprehensive recalibration and traceable calibration is required.
2. The temperature is between 15 ° C and 30 ° C.
3. Accept acceptable LCD visibility.
4. For inductance between 100uH and 100mH.
For capacitors between 200pF and 500nF.
6. Suitable for resistors between 10R and 1MR.

Please note that our product specifications are subject to change without prior notice.

E＆OE。 08/12
Function Summary
• Automatic component recognition.
Automatic testing frequency selection (DC, 1kHz, 15kHz,
200kHz）。
Delay or real-time analysis (for hands-free operation).
Automatic shutdown.
Non volatile probe and test wire compensation.
Interchangeable probe sets.
Automatic range and scaling with unit display.
The basic resistance accuracy is 1%.
The basic inductance/capacitance accuracy is 1.5%.