-
E-mail
shanghai@kest-china.com
-
Phone
15051686479
-
Address
No.1 Hongfeng Road, Kunshan City
Product Categories
Kunshan Hongxu Machinery Co., Ltd
KBS4 spring applies force to normally closed brake clutch
NegotiableUpdate on 01/21
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Product features: Our company is a manufacturer of spring-loaded normally closed brake clutches, with many years of research and development experience in the industrial brake industry.
Product Details
Product Introduction
Spring applies force to the normally closed brake clutch
Normally closed brake
Principle of normally closed brake: The embedded disc normally closed pneumatic brake is different from the normally open brake in that the normally open brake is a ventilated holding brake, which clamps the clamps on both sides as soon as the air is ventilated. The normally closed brake, as shown in the figure, is always in a clamped state and releases after the air is ventilated. Therefore, in the normal state, the normally closed brake is always in a braking state. The normally closed brake spring applies force for braking, and the pneumatic drive releases it.
Spring applies force to the normally closed brake clutch
Normally closed brake:
DB-3010AF-03 DB-3010AF-04 DB-3010A-2 DB-3010A-132 DB-3010A-3 DB-3010A-4DB-3010A-5 DB-3012A-2 DB-3012A-3 DB-3012A-4 DB-3012A-5 DB-3020AF-01 DB-3020AF-02 DB-3020AF-03 DB-3020AF-04 DB-3020A-2 DB-3020A-3 DB-3020A-4 DB-3020A-5 DB-3032AF-01 DB-3032AF-02 DB-3032AF-03 DB-3032A-01
KBS2 spring applies force to brake, pneumatic drive releases
Brake discs with a thickness of 25.4-30-40mm are also suitable.
Available also for disc thickness 25.4-30-40mm.
Technical data
Braking force F:
KBS2-1 2750N
KBS2-2 5500N
KBS2-3 10970N
Acceleration torque
=F * [Brake disc radius (m) -0.031]=Nm
Total wear of a pair of friction plates: 16mm
New single friction plate thickness: 16mm
Continuous heat dissipation power
Qc：1.7KW
Dual brake pad type continuous heat dissipation power Qc: 2.7KW
Small release pressure: 5 bar
The following number of springs can achieve the indicated force in the left figure
Moment value:
2-1 type 4 springs
2-2 and 2-3 types with 8 springs
To reduce the torque, the number of springs can be correspondingly reduced:
2-1 type reduced to 2 springs
Reduce the number of springs from 2-2 and 2-3 to 6, 4, and 2
The chart indicates the force per millimeter of friction plate wear
Moment variation situation.
Adjust the torque value according to the requirements.
Similar Product Recommend
