-
E-mail
powerliu@ourjsa.com
-
Phone
13510446554
-
Address
301, 3rd Floor, Building B, Hedong, Hangcheng Industrial Zone, Xixiang, Shenzhen
Product Categories
- Formaldehyde detector
- Residual chlorine detector
- Nitrogen oxide detector
- Nitrogen detector
- Ethylene detector
- Butadiene detector
- Carbon dioxide detector
- Composite gas detector
- Phosphine detector
- Fluorine gas detector
- Ozone detector
- Smoke detector
- Combustible gas detector
- Spray paint detector
- Carbon monoxide detector
Shenzhen Jida'an Technology Co., Ltd
JSA8-O3 portable ozone detector
NegotiableUpdate on 06/02
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The portable ozone detector is suitable for continuous online detection and on-site sound and light alarm in various industrial and special environments, playing a warning role in the safety of hazardous operations. The instrument adopts imported electrochemical sensor and microcontroller technology, which has the advantages of stable signal, high accuracy, and good repeatability. The explosion-proof wiring method is suitable for various hazardous areas. The instrument is compatible with various control systems such as alarm systems, PLC, DCS, etc., and can simultaneously achieve on-site alarm and remote monitoring and alarm functions.
Product Details
| brand | Jida'an | Origin category | domestic |
|---|---|---|---|
| application area | Medical and health care, environmental protection, chemical industry, petroleum, energy |
Portable ozone detectorofcharacteristic:
1. The whole machine has a small volume, light weight, waterproof, explosion-proof, and shockproof design;
2. High precision, high resolution, and rapid response;
3. Adopting large capacity rechargeable lithium batteries, which can work continuously for a long time;
4. It has time display and remaining battery display functions;
5. Digital LCD backlight display, displaying test gases, units, and pump suction display;
6. Sound, light, and vibration alarm functions. Portable ozone detector has low battery alarm, sensor fault detection alarm, and over range alarm functions;
7. The sensor adopts an electrochemical ozone sensor;
8. The upper and lower limit alarm values can be set arbitrarily, with built-in zero and target point calibration functions, built-in temperature compensation to reduce measurement errors, and easy maintenance;
9. Data recovery function, eliminating worries caused by misoperation;
10. The shell is made of special materials and processes, which are not easy to wear and tear, easy to clean, and shiny as new after long-term use.
Technical parameters:
Detecting gas: Ozone in the air
Detection principle: electrochemical method
Detection range: 0-1ppm, 5ppm, 10ppm, 20ppm, 50ppm, 100ppm, 500ppm, 1000ppm, 5000ppm optional
Resolution: 0.001ppm (0-1 ppm); 0.01ppm（0～100 ppm）； 0.1ppm (0-500 ppm or above)
Detection method: diffusion type, pump suction type optional
Display mode: LCD backlit display
Detection accuracy: ≤± 2% (F.S)
Alarm mode: Sound and light alarm, vibration alarm (optional function)
Response time: less than 30 seconds
Recovery time: less than 40 seconds
Working power supply: DC3.6V
Battery capacity: 3.6VDC, 1800mA, with charging protection function
Sensor lifespan: over two years
Usage environment: Temperature -20 ℃~+70 ℃; Relative humidity ≤ 95% RH (non condensing)
Explosion proof type: intrinsic safety type
Explosion proof mark: Exia II CT6
Protection level: IP65
Dimensions: 125 × 52 × 30mm (L × W × H)
Standard attachments: instruction manual, charger
Optional accessories: 1 0.8m sampling handle, 1 instrument box
Weight: 200g
Similar Product Recommend
