Product Categories

Shanghai Jizhou Chemical Technology Co., Ltd

E-mail
842442041@qq.com
Phone
13585884985
Address
Lane 803, Songbin Road, Baoshan District, Shanghai

JM10 Carbon Hydrogen Nitrogen Element Quantitative System

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

JM10 Carbon Hydrogen Nitrogen Element Quantitative System $r $n Hydrogen 0.5-400 μ g, Carbon 3-2600 μ g, Nitrogen 1-1000 μ g, (Oxygen 50-1000 μ g), (Sulfur 50-1000 μ g)

Product Details

JM10 Carbon Hydrogen Nitrogen Element Quantitative System
The MICRO CORDER JM10 is an organic trace element analysis device that uses Pregl Dumas as the basic principle for detection. The equipment is controlled by a control panel for macroscopic simultaneous quantitative determination of carbon, hydrogen, and nitrogen elements, without the need for skilled technicians in previous analytical techniques to complete the entire detection. The sample is directly drawn from the sampling box, and due to the method of introducing combustion components, excellent analysis accuracy can be obtained. The electronic technology used in the instrument has ensured a significant leap in stability, operability, and economy of the device.

This device adopts a computer control system, which can provide you with stable analysis results, making the detection work simpler, safer, and more economical.

advantage

Open sample inlet

There is * carrier gas flowing out from the combustion nozzle to prevent air from entering. Due to this design, sample installation and disassembly are very convenient, and the pressure applied to explosive samples can be instantly reduced without producing abnormal analysis results. The sample is directly measured by a sample ship, making the measurement faster and more accurate.

Confirm if there are any residues

The equipment can confirm the presence of residual substances in the ash content every time the sample compartment is taken out, and if necessary, it can be retested to obtain the ash content. When there is doubt about the analysis results, the grey component will be an important reference for answering questions.

Built in pressure correction device in data processing system

The standard computer receives the pressure signal from the pressure correction device and transmits it to the detector to directly display the result. The results are stored in memory and can be printed or subjected to statistical processing. If connected to an electronic scale, automatic sampling can be controlled by a computer

Can perform unmanned detection

The device is connected to an automatic sampling device, which can achieve unmanned operation of sample import and recovery work. After the analysis is completed, the instrument will automatically cool down and then shut down. Setting a timer on the PC allows for device preheating in unmanned situations, saving time wasted waiting.

Independent detector

The MICRO CORDER JM10 is equipped with an independent TCD detector that can detect carbon, hydrogen, and nitrogen elements. This detector has good detection sensitivity for all elements. When in high sensitivity settings, single element analysis can be performed, as well as corresponding analysis of multiple samples.

Application field

1. Quality control analysis of pharmaceutical and chemical products

2. Analysis of fuels such as petroleum, kerosene, heavy oil, coal, coke, etc

3. Analysis of soil, mud, residual sludge in groundwater, etc

4. Analysis of plankton in seawater, lakes, and rivers

5. Analysis of atmospheric pollutants such as particulate matter in automobile exhaust

6. Analysis of inorganic compounds containing carbon, hydrogen, and nitrogen elements

7. Analysis of food raw materials and products

Analysis of Crystalline Water, Adhesive Water, etc. in Inorganic Substances

JM10 Technical Parameters

1. Determine the elements carbon, hydrogen, nitrogen, oxygen, or sulfur (oxygen sulfur detection is optional)

2. Measurement method: self integration (using a dual piston pump)

3. Measurement accuracy error within ± 0.3% (oxygen analysis and sulfur analysis within ± 0.5%)

4. Measurement range: Hydrogen 0.5-400 μ g

Carbon 3~2600 μ g

Nitrogen 1-1000 μ g

(Oxygen 50-1000 μ g)

(Sulfur 50-1000 μ g)

*The scope of analysis here is measured under standard analytical conditions. The upper and lower limits of the measurement range may change due to changes in analysis conditions.

5. The sample size is usually around 2mg, measured by a microbalance

*The analysis sample can be organic matter in soil or catalyst. In this case, up to 1g of the sample can be analyzed, and ultra trace analysis of trace samples can also be performed

6. Analytical ability 5-10 times/hour (standard setting)

7. Stable time: Analysis can be conducted approximately 90 minutes after startup

8. Combustion method: helium oxygen mixture method

9. Combustion section

9-1. Stable control method PID control solid-state relay

9-2. Standard Stable Setting Sample Furnace 950 ℃

Combustion furnace 850 ℃

Reduction furnace 550 ℃

9-3. Combustion tube made of transparent quartz glass with an inner diameter of 10mm and a length of 650mm

9-4. Reduction tube made of transparent quartz glass with a diameter of 10mm and a length of 395mm

10. Thermostatic bath

10-1. Temperature control method PID control solid-state relay

10-2. Standard stable setting pump constant temperature bath at 55 ℃

Detector constant temperature bath at 100 ℃

11. Thermal conductivity detector 60 Ω 4 units tungsten wire built-in with three groups

12. Built in air pressure correction device, automatic output of air pressure (hPa) value by computer

13. The recorder terminal has a full range of 10mV HCN output, with each individual output

14. Computer configuration: Windows XP resolution 1024 × 768-bit Serial port standard configuration

15. Monitor 17 inch CRT

16. Print output WindoP compatible printer

17. Other

17-1. The misoperation report alarm sounds, the error content is printed out, and the instrument is forced to stop running at the same time

17-2. When the automatic analysis starts connecting to the automatic sampler and the device is stable and all other conditions are suitable for analysis, it emits a homophone and the analysis begins.

17-3. Automatic stop: After the sample analysis confirmation is terminated, it will automatically cool down

17-4. After starting the self diagnostic testing program, various operations can be confirmed

18. Power supply

18-1. Voltage AC100V

18-2. Power supply power 3kVA (two 1.5kVA)

18-3. Frequency 50Hz or 60Hz

19. Host size 760 (W) × 595 (D) × 485 (H)

20. Approximately 90kg in weight

Oxygen element analysis requires the use of oxygen element analysis accessories (optional)

◆ Sulfur analysis requires the use of a sulfur analysis unit (optional)

Hejie Technology is a professional agent company for hydrocarbon and nitrogen element analyzers, dedicated to providing you withJM10 Carbon Hydrogen Nitrogen Element Quantitative System.