Intelligent four circuit display regulator

NegotiableUpdate on 01/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SR-XMEA series intelligent four loop display regulator is no longer a simple display instrument in the past. Most products in this series of instruments have strong processing capabilities such as calculation, comparison, execution, and alarm.

Product Details

Intelligent four circuit display regulator

SR-XMEAintelligenceFour circuit display regulatorWhen used in conjunction with various sensors and transmitters, it can simultaneously measure, display, alarm control, transmit output, data acquisition, and communication of industrial process parameters such as temperature, pressure, liquid level, flow rate, and weight in four channels.

1intelligenceFour circuit display regulatorFunction of:

1Input signal types: thermocouple, thermistor, linear current, linear voltage.

2Four screen display or single screen with four light columns.

3The zero point value, full scale value, and decimal place of each channel can be defined.

4Free selection of combinations of 4 relays for allocation, and also capable of achieving sound and light alarm output. The four set values can independently set parameters and hysteresis intervals, and the alarm control mode can be freely selected.

5It can achieve 1-3 simultaneous transmission outputs (0-10mA, 4-20mA, 0-5V, 1-5V).

6Can provide RS485 asynchronous serial communication with multiple hosts, single host, and no host modes. Communication data verification follows the CRC-16 American data communication standard, with high reliability cycling and barcode verification.

2、 The panel display of the intelligent four-way display regulator shows:

1.Four screen display: PV1 screen displays the measured values of * input signals.

PV2The screen displays the measured value of the second input signal.

PV3The screen displays the measured value of the third input signal.

PV4The screen displays the measured value of the fourth input signal.

2. Single screen four column display: Single screen: The display screen can display the measurement value of one input signal at will, press the ▲ key to switch.

Column 1: Display the measurement signal of * channel input in percentage form.

Column 2: Display the measurement signal of the second input in percentage form.

Column 3: Display the measurement signal of the third input in percentage form.

Column 4: Display the measurement signal of the fourth input in percentage form.

3、 Selection table for intelligent four-way display regulator:

model		Instructions
SR-XMEA		Intelligent four circuit display regulator
design program	9	9000Series instruments
display mode	1 2	Four screen display Single screen four pillar display
input method	1 2 3 4 5	Thermocouple signals (E, K, S, B, J, T, N, R, etc.) Thermal resistance signals (Pt100, Cu50, Cu100, BA1, BA2, G, etc.) DC current signal (0-10mA, 4-20mA) DC voltage signal (0-5V, 1-5V, 0-20mV, 0-75MV, 0-20mV) Equipped with remote transmission pressure resistance value and linear resistance value (0-400 Ω)
controlled output And adjustment method (Switching quantity)	1 2 3 4 5 6 7 8	Only displaying four measurement values without control Unified setting of upper and lower limit alarm values for four channels (using two common relays) Four independent upper and lower limit alarm values (shared by two relays) Four independent sets of upper and lower limit alarm values (each with one relay) Independently set upper and lower limit alarm values with the second channel (each using 2 separate relays) There are 3 alarm outputs on the road, and 1 alarm output on the second road *There are 4 alarm outputs on the road SP3Used to monitor other alarm points and has sound and light alarm functions
Overall dimensions	H V	Horizontal 160 × 80 × 80mm opening: 152 × 76 Vertical 80 × 160 × 125mm opening: 76 × 152
transmitter output	A B C D E F	The main input or secondary input can independently transmit output (Main input ± Secondary input) × (Lup Ldo) (Main input ± Secondary input) × (Lup Ldo)+Display displacement+PFS Output of operation values for primary and secondary inputs The main input and auxiliary input are both independently transmitted and output Special requirements for transmission output
24Voutput	P	Default is no 24V DC power output With 24V DC power output (can be used as a two-wire transmitter power supply)
communication interface	T	Default is without communication interface Equipped with RS232 or RS485 communication interface
power supply method	K W	Default is 220V. AV Switching power supply 85-260V. AC Switching power supply 18-36V.DC or 18-36V.AC