In place sterilization glass fermentation tank

In place sterilization glass fermentation tankstructural characteristics

Tank body: Stainless steel tank body, large range high-temperature resistant glass sight glass for easy observation of materials; Magnetic stirring, no shaft seal system, no possibility of bacterial leakage or contamination; Wide field of vision; The magnetic stirring system is suspended above, with no top needle at the bottom and a liquid filling coefficient of 70. It can stir while sterilizing and effectively disinfect the culture medium.

Stirring: Adopting a strong magnetic stirring system with an upper suspension, magnetic stirring at the bottom of the tank without a top needle, and using high-quality aluminum alloy motors and imported speed controllers to ensure stable speed; High performance mixing paddle, defoaming paddle, AC speed regulating motor, stepless speed regulation. All the components inside the tank are installed on the tank cover, making maintenance and cleaning very convenient; Fermentation standard six leaf flat paddle, with adjustable blade height, and can also be replaced with different types of mixing paddles according to the special requirements of the fermentation process. No mechanical seal, not easy to leak, variable frequency speed control motor, speed control controller. The magnetic stirring system adopts special permanent magnet materials, * processing technology, no demagnetization, and the highest stirring speed will not be lower than 980rpm during the service life of the fermentation tank. It can also achieve the highest speed in high viscosity media. The fully automatic setting control range is 50~1000rpm ± 5 rpm.

In place sterilization glass fermentation tankVentilation: manual control, flow meter display. Including rotor flowmeter, imported filter membrane air sterilization filter, with a filtration accuracy of up to 0.02 μ m

Temperature: jacketed water bath electric heating, automatic control, temperature control cooling water temperature+5 ℃~65 ℃ ± 0.2 ℃

Foam: full automatic PID control and alarm, peristaltic pump automatically adds defoamer

Feeding: PID fully automatic setting peristaltic pump switch control, automatic flow addition and metering.

PH: Swiss Mettler electrodes (compatible with high-quality domestic electrodes) are used, and the peristaltic pump automatically adds acid and alkali to accurately control pH. The display range is 0.00~14.00 ± 0.01, and the fully automatic control range is 2.00~12.00 ± 0.05.

DO: Using Swiss Mettler electrodes (compatible with high-quality domestic electrodes), controlled in conjunction with rotational speed (optional air flow, feeding, etc.), 0-150 ± 3%, display accuracy of 0.1%
Pressure: manual control, instrument display

Control: Single tank can use BIOTECH-2002 biological process controller supplemented with BIOTECH-FCS fermentation * * software, which allows you to observe fermentation changes on-site and implement remote * * of the fermentation process;