-
E-mail
2380677812@qq.com
-
Phone
15111274459
-
Address
Room 1919, Building 4, Gaosheng Times Square, No. 798 Zhongyi 1st Road, Yuhua District
Product Categories
Hunan Weimei Electric Technology Co., Ltd
Impedance spectrum level instrument
NegotiableUpdate on 05/11
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Measurement principle: The impedance spectrum sensor material detection principle uses a frequency scanning method to emit an electric field signal in the sensing section. Due to the different characteristics of the medium, different resonant spectra will be generated to determine whether the sensor is covered by the material and output a switch signal.
Product Details
[Features]
Using standard connectors for easy installation and high protection level（IP67)
Lightweight and compact design makes it easy to carry and transport, and can be quickly installed even in small spaces or difficult to operate situations.
Probe materialPEEKSurface roughnessRa＜0.8Good wear resistance.
Equipped with magnetic testing action function, it can instantly confirm the normal operation of installation wiring and equipment.
The stainless steel casing is sturdy and durable.
Equipped with overcurrent protection, it automatically detects that the output circuit will immediately shut down when the current is too high.
can beCIPApplied in a clean environment.
Suitable for single point limit detection and idle protection of powder or granular media in containers and pipelines.
provide2groupNPNThePNPOutput.
| Scope of application | Powder and granular media |
| ambient temperature | -40~80℃（-40F-176F) |
| Process temperature | -40~100℃ |
| Supply power | 12VDC-30VDC |
| Power consumption | Max.50mA |
| overvoltage protection | IILevel overvoltage protection |
| reverse protection | yes |
| switch output | 2A switch output, th1Group outputNO， 第2Group outputNC |
| output mode | （DC）PNPTheNPN(Optional) |
| Switch delay function | ＜1second |
| Output load current | Max.50mA |
| voltage drop | Max.2.5V |
| short circuit protection | Yes, short pulse |
| overload protection | yes |
| electrical connection | M12 4pinconnector socket |
| wetted material | 316/316Loptional |
| Process pressure | -1~40bar |
| Connection specifications | 1/2’’G |
| Probe material/Surface roughness | PEEK/Ra＜0.8 |
| Shell protection level | IP67 |
| status indicator | Startup statusLEDYellow, Return to StateLEDgreen |
| Simulated output testing | Magnetic testing (this sticker is located near the marked point)3More than seconds, switch output) |
