Hydrogen Generator - LM-500

The LM series hydrogen generator uses SPE ion membrane as the electrolyte, which only requires electrolysis of pure water to produce hydrogen. After no alkali is added and powered on, the cathode of the electrolytic cell produces hydrogen gas and the anode produces oxygen gas; After entering the hydrogen/water separator, hydrogen and water are separated, and the separated water is controlled by a water level controller and a drainage solenoid valve. Oxygen is discharged into the air, while hydrogen enters the dryer for dehumidification and is output through the outlet. The flow rate and pressure of hydrogen are controlled by a high-sensitivity fuzzy control system and an automatic tracking pressure control system, with digital display of its changes and constant output. The system is equipped with overvoltage protection to ensure the safe operation of the instrument and extend its service life.

Hydrogen purity:>99.999% -99.9999%
Hydrogen flow rate: 500ml/min
Output pressure: 0.02-0.45Mpa
Pure water tank capacity: 3L
Available pure water greater than:>2M Ω deionized water
Pure water consumption approximately: 30ml/hr
Power supply: AC 200-240V/50HZ-60HZ
Overall power:<260W
Dimensions: 190 * 370 * 390 (mm)
Net weight:<12Kg