-
E-mail
578968805@qq.com
- Phone
-
Address
Lituo, Yuhua District, Changsha City, Hunan Province
Hunan Zhongcheng Pharmaceutical Machinery Factory
578968805@qq.com
Lituo, Yuhua District, Changsha City, Hunan Province
Product Introduction
The full-automatic mixerIntroducing a complete set of design materials from abroad, featuring novelty, efficiency, energy saving, and excellent performance. This machine has a compact structure, simple operation, beautiful appearance, small footprint, easy cleaning, and good mixing effect. The whole machine is sealed with stainless steel, which meets the requirementsGMPrequirement.

Mixed chemical raw materials Mixed capsule raw materials Mixed fish feed Mixed feed Mixed ore powder raw materials Mixed fireworks raw materials






Product Usage
The full-automatic mixerWidely used in the mixing of pharmaceuticals, food, health products, chemicals, fertilizers, veterinary drugs, metallurgy, smelting, refractory materials, mining, building materials, feed, aquaculture, and biotechnology. This machine has a wide adaptability to mixtures, and has good adaptability to the mixing of various particles, fibers, or sheet-like materials such as coarse materials, fine particles, and ultrafine powders. Especially suitable for mixing materials with high uniformity requirements and large differences in material density.
Medicine:A mixture of capsule granules, traditional Chinese medicine seasonings, powdered or granular Chinese herbal medicines, etc.
Feed:It can mix various types of feed such as fish feed, poultry feed, wild animal feed, and poultry feed.
Food:Condiments, additives, vitamins, etc.
Fuel:A mixture of various firecrackers, fireworks, and other raw materials.
Ore:Mixing various powdered or granular ores, etc.
working volume: 20L
Mixing time: 5-20turn/minute
Propeller shaft speed: 24turn/minute
Distance between blade and fuselage: 3mm
Pouring method: manual
The maximum inclination angle of the material trough: 140degree
Output 16kg/time
Power: 0.55kw
External dimensions: 800×330×580mm
Weight: 80kg
operating process(The pictures are guaranteed to be taken on site!)
1. Preparation: First, prepare the materials to be mixed and place them separately in the tray. The material is slightly moist (if the material is very dry, our factory's V-type mixer is needed) and cannot be entirely liquid or solid or semi-solid. If the material is too rough, you can first use my crusher to crush it, and then mix it.
2. Feeding: Open the top cover of the machine, place the just prepared material into the U-shaped groove, and add a small amount of water (the material should not exceed the horizontal line of the slurry shaft for better mixing).
3. Mixing: Cover the top of the material trough, tighten the fixing screws of the trough, and then turn on the switch to start mixing the materials.
4. Discharge: First, turn off the switch, loosen the fixing screw of the material trough, tilt the trough, and pour out the material.
|
Pour the material into the mixing tank of the mixer |
2. Dry powder materials need to be added with a small amount of water |
|
3. Turn on the power of the mixer |
4 materials are mixed in the mixing tank |
|
Turn off the switch and remove the mixed material |
6 Mixed materials completed |
Our factory specializes in producing mixer mixing equipment. Due to significant fluctuations in raw material prices, costs fluctuate with the market. If you would like to know more, please contact usgridPlease.
Installation Instructions
The full-automatic mixerTo pack the entire unit, unpack and move it to a suitable location, install the anchor bolts, evenly tighten the nuts of the anchor bolts, and then connect the power cord for use.
Our company produces various types of mixers. If you are interested in mixers and would like to know more about this product or other models of mixers (product price quotation, physical product, product operation video), please contact usProvide consultation.