Hot melt sleeve with patched leather, polyurethane insulation pipe with patched leather

Hot melt sleeve with patched leather, polyurethane insulation pipe with patched leather

Electric melting sleeve is a material for polyurethane insulation pipeline fittings, mainly made of polyethylene with electric melting connection inside. During use, wrap the material around the insulation pipe and connect it to the power supply. After about 20 minutes, it can be firmly combined with the polyurethane insulation pipeline. This material accessory has the advantages of water tightness, high strength, corrosion resistance, and easy use, and is widely used in the joint patching of polyurethane anti-corrosion and insulation pipelines. During the construction process, the dust and burrs on the pipeline should be cleaned up. The material should be wrapped around the pipeline and secured with ropes to prevent loosening. Then, the power supply should be connected and wait for the accessory materials to be combined with the insulation pipe.

The hot melt sleeve has received good reviews from all walks of life during its years of use. The electric heating wire added can quickly melt the connecting components and has better sealing performance than other joint filling methods. For the user, this joint filling method is undoubtedly a good construction method. This method not only makes the project more reliable, but also saves a lot of time for the construction party.

Hot melt sleeve with patched leather, polyurethane insulation pipe with patched leather

The materials produced by our company also include high-density polyethylene joint coating leather, heat shrinkable tape and other accessory materials. Polyethylene joint coating leather is more troublesome during construction compared to hot-melt sleeves. During the construction of polyethylene joint patch leather, the material should first be cut to a suitable length around the circumference, fixed on the insulation pipe with iron wire, and then sealed with heat shrink tape to seal the two sections of the interface and the horizontal overlapping part. The heat shrink tape should be evenly baked on the polyurethane insulation pipe and the place where the heat shrink tape is fixed, so that the heat shrink tape can be firmly integrated with the pipe.

The high-density polyethylene (HDPE) material produced by our company is mainly used as the outer protective material for heating pipelines. Its melting point is 125 ° -130 °. With more than 10 years of production experience and professional testing equipment, the material is tested before leaving the factory, and if it passes the test, it is allowed to leave the site. In the process of use, the materials produced by our company have been recognized and praised by a large number of users. Our company adheres to the business philosophy of reputation, quality, and customer satisfaction to provide customers with high-quality products and services!