Hammer type feed pellet crusher

NegotiableUpdate on 04/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The hammer type feed pellet crusher is a multifunctional active crushing machine, which is an old product with reliable quality and high economic benefits. For decades, it has been the preferred product for individual professional households, township enterprises, and small and medium-sized breeding farms in the feed industry.

Product Details

　　Introduction to Hammer type Feed Particle Grinder:It can be matched with various forms of feeding structures, and the hammer pieces are symmetrically arranged. When the crusher is working, the material enters the crushing chamber and is gradually crushed by the high-speed rotating hammer and the friction of the sieve plate. Under the action of centrifugal force and airflow, the material is discharged through the bottom discharge port. This series of crusher housings are made of high-quality steel welded together, with the feed inlet located at the top of the crusher.

This machine is a multifunctional crushing tool that has been improved multiple times based on the 9FQ-50. It is simple, reliable in performance, good in economic benefits, convenient in use and maintenance, and can meet the requirements of crushing non-woven fabrics, ordinary particles (such as rice, corn, sorghum, barley (small) wheat, silkworm beans), stems (such as potato vines, peanut stalks, corn cobs), Youbing (Deep-fried round and flat dough-cake) after oil extraction, shells (such as unprocessed grain, dry distiller's grains, peanut shells) and other materials into feed. It is very suitable for individual specialized households in the feed industry, township enterprises, and small and medium-sized feedlots, especially suitable for the husks produced by rice mills with a daily output of more than 30 tons.

It can also crush non-woven fabrics, soybeans, sorghum, blighted grains, rice straw, potato vines, peanut hulls, dry distiller's grains, barley, wheat, broad beans, peas, peanut stalks, corn cobs, corn stalks, sesame stalks, sorghum stalks, soybean stalks, leather leftovers, medicinal materials, eiderdown, crushed sugarcane, malt, coal, barite and other particles, stems, shells and other materials. (The screen pieces can be replaced according to the different materials crushed, with the aperture of 0.6 MM、0.8MM、1.0MM、1.2MM、1.5MM、2.0MM、3MM、4MM、5MM、6MM、7MM、8MM、9MM、10MM Wait, no matter how large the aperture of the sieve is, it can be manufactured. )

Scope of application:

① Used for crushing corn, wheat, soybeans, rice, soybean meal, etc

② Used for crushing fibrous rod-shaped materials such as corn stalks, cotton stalks, peanut seedlings, weeds, and tree branches. The fineness of the crushed materials can reach less than 2 millimeters.

　　Product Features:

During the stacking process, raw materials may mix with debris such as sand, cement blocks, and iron nails. These debris entering the crushing chamber can easily damage the sieve and other components, and even damage the machine casing, which not only increases the cost of use, but also affects the quality of the bran and increases the difficulty of operation. The self feeding crusher must have the function of removing debris.

　　Hammer type feed pellet crusherTechnical parameters and performance indicators

1. Rotor diameter 500mm

2. Spindle speed 3300r/min

3. Supporting power 18.5-22KW (4 levels) or supporting power 20 horsepower diesel engine

4. The width of the crushing chamber is 275mm

5. The gap between the hammer and sieve is 8-16mm

6. Number of hammer pieces: 16 pieces

7. Bearing model 1308

8. Triangle tape model B

9. Dimensions 1050 × 1010 × 1100 (length × width × height) mm

10. Whole machine weight 295KG

Main performance indicators

The productivity of this machine when crushing materials with a moisture content of less than 14% using a 1.2mm aperture sieve under normal operating conditions is:

Rice: 680 Kg/h

Rice hulls produced by rice milling machine: 570-780 Kg/h

Corn: 2900-3300 KG/H