GS 1100/1300 adhesive pre sintering integrated furnace

: 1. Temperature of 1100C and 1300C (two models of temperature are available for selection)

1. The temperature is 1100 ° C and 1300 ° C (two models of temperature are available for selection).

2. Dual system thermal field control method, combining low-temperature hot air circulation and high-temperature five sided thermal injection control.

3. During low-temperature rubber discharge, the furnace adopts a hot air circulation method to ensure the uniformity of the temperature field required for rubber discharge.

4. During high-temperature preheating and sintering, a five sided heating method is used inside the furnace to ensure the uniformity of the temperature field required for preheating and sintering;

5. Heating elements are interspersed with corundum tubes for easy installation, maintenance, and repair;

6. Overtemperature protection function, automatically shuts off when the temperature exceeds the allowed set value and when there is leakage in the furnace body. Power off when opening the door and power on when closing the door for greater safety.

【 Basic Parameters 】:
1100 type adhesive pre firing integrated furnace

Device Model	temperature	Furnace size [WxHxD]	Heating method	Heating method	voltage	power
GS-60/11	1100℃	280X400X400mm	Five sided heating	K-type	380V	17KW
GS-125/11	1100℃	380X 500X500mm	Five sided heating	K-type	380V	25KW
GS -300/11	1100℃	440X780X700mm	Five sided heating	K-type	380V	50KW
GS-700/11	1100℃	700x1100X820mm	Five sided heating	K-type	380V	63KW