Floor temperature and humidity resistance test chamber

Floor temperature and humidity resistance test chamber

Inner box size:600*600*700mm

Outer box size: width750tall1750deep1500

Temperature range:-50℃----160℃

Humidity range:30%-98%

Resolution accuracy:1. Temperature±0.1℃

2. Humidity±0.4RH

Uniformity of distribution1. Temperature±0.6%℃

2. Humidity±2.5%RH

Heating time: from-5It takes about 0 ℃ to rise to 100 ℃55 minutes

Cooling time: determined byIt takes about 55 minutes for the temperature to drop from 30 ℃ to -40 ℃

Floor temperature and humidity resistance test chamberMachine structure and material:

1. Inner box material: US # 304 heat-resistant and cold resistant stainless steel plate

2. Outer box material: baked paint

3. Insulation material: imported high-strength PU foam insulation material

4. Sweat prevention mechanism: using the thermal energy of the system K-type tube and the thin film electric heating wire as sweat prevention treatment

Temperature and humidity controller: original imported from South KoreaTEMI-300 "button type English human-machine interface, data and information screen display, conversation mode, temperature and humidity controller, single point and programmable control, adjustable screen backlight.

Resolution:0.01℃, 0.1%R.H

temperature range: -99.9℃～+300℃

humidity range:10%～99.9%R.H

Number of program segments10 sets of programs with 100 memory segments

Each segment can set temperature simultaneously,Humidity and time, can be run 999 times repeatedly

The program runs in standby modeJump, hold and other functions

Equipped with functions such as timed shutdown and program termination

Equipped with scheduled start, stop, and fault notification functions

thermometer2 PT-100s

The main components of each system are equipped with safety detection interface devices. When abnormal faults occur, they are immediately displayed on the screen Fault status and power cut-off.

It has the function of displaying accumulated running time, which can be used for machine running time and reference.

Program executionSV value curve view

Freezing system1. Energy saving industrial low-temperature compressor

2. The cooling method adopts air-cooled type

3. * Freezing accessories such as solenoid valves, drying filters, etc

4. The condenser adopts fins and is equipped with a cooling motor device

heating system1. Use U-Type SUS # 304 electric heating tube for heating

2. The humidification bucket is made of SUS # 304 stainless steel and comes with a water level observation window

3. Heat up Cooling down Humidification and dehumidification system * independent

4. Intelligent automatic heating and humidification function

protective device1. Equipped with a non fuse protection switch

2. Equipped with pressure protection, explosion-proof protection and other devices

3. Cold coal high and low pressure protection device and compressor overload protection device

Air circulation system1. Adopting wing centrifugal fan and sealed motor, it is not easy to lose oil and bundle center

2. Vertical diffusion, horizontal exchange, and arc-shaped circulating air supply method

3. Adjustable side blowing air outlet and protective net recycling port

backwater systemEliminate the trouble of frequent water addition, maintain clean water sources for a long time, and avoid damage to machine systems

5. Accessory equipment:

A、 Double layer temperature resistant high tension packing B, 4 adjustable movable shelves C, 1 external test hole

D、 Energy saving lighting lamp E, multi-layer vacuum glass window door

power supply380V 10.0KW