FX-8 Image Observation System

NegotiableUpdate on 05/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The optical system adopts a modular design of components, with good interchangeability of parts and components, which can facilitate future microscope upgrades and the addition of other functions; The main structure is equipped with a conversion table with no less than 6-hole objective lens and 3-speed coaxial focusing knobs (coarse, 4um, 1um)

Product Details

Function:

Equipped with spectral composition analysis function

Ø Equipped with graph comparison management analysis and intelligent recognition analysis of abrasive particles

The system software has the functions of comparing and managing graph libraries, as well as intelligent recognition and analysis of abrasive particles;

Ø Can analyze the wear morphology and mechanism of abrasive particles in lubricating mechanisms made of copper, aluminum and other alloy materials, as well as bearing alloys (Babbitt alloys);

Capable of completing a complete wear mechanism analysis and research with TTL wear analysis.

Technical indicators:

The optical system adopts a modular design of components, with good interchangeability of parts and components, which can facilitate future microscope upgrades and the addition of other functions.

The main structure is equipped with a conversion table with no less than 6-hole objective lens and 3-speed coaxial focusing knobs (coarse, 4um, 1um);

Ø It has the function of providing different colored lines (consistent with the colored lines of different magnification objectives) to indicate the optimal aperture stop when observed at different magnifications;

Equipped with at least 10 x, 20 x, 50 x, and 100 x flat field achromatic objective lenses;

The magnification of the eyepiece shall not be less than 10 times, the field of view index shall not be less than 22mm, and the curvature shall be adjustable;

Ø The interface adopts standard interfaces, such as 0.55XC interface, etc;

Digital cameras shall not be less than 3 million physical pixels and 7.2 million resolution;

The image analysis system must have functions such as acquisition, storage, and analysis of length, thickness, and electronic ruler;