Energy saving, environmentally friendly, safe, and efficient digital display ceramic electric heating sleeve for heating

Introduction to Energy saving, Environmental Protection, Safety, Heating Efficiency, Digital Display Ceramic Electric Heating Set

Digital display ceramic electric heating sleeveofCeramic heating bowl is a new type of heating bowl, which is an improved and upgraded version of fiberglass woven heating bowl

Plate is made by winding heating wires into a spiral spring shape and embedding them in a ceramic body. Ceramics are made of various materials with high temperature resistance and low expansion

Made by high-temperature sintering of materials, the product has the characteristics of safe use, beautiful and practical appearance, fast heat transfer, efficient heating, energy conservation and environmental protection. send

Hot wire buried in ceramics is not easily oxidized and has a long service life. It can be used in acidic and alkaline environments with oxidation (liquids cannot be directly poured into it)

Heating in a bowl

​


Applicable to

Widely used in industries such as chemical and petroleum, pharmaceuticals, teaching experiments, physics and biology research, etc

Technical Specifications

1Power supply voltage:～220V 50HZ

2. High temperature: 350 ℃

3. Temperature control accuracy: ± 1 ℃

4. Working hours: 8 hours

Energy saving, environmentally friendly, safe, and efficient digital display ceramic electric heating sleeve usage precautions

1. The instrument should have a good grounding.

2. Due to the limited temperature resistance of the motor and magnet of the mixer, the instrument cannot be used alone for heating tests, especially for high-temperature heating tests

For hot use, please adjust the motor to a rotating or low-speed rotating state (idle) to prevent damage to the motor and magnet due to high temperature radiation.

When the high-temperature heating is completed, please turn off the heating first and wait for a few minutes for the remaining temperature to dissipate before turning off the stirring.

4. The heating part has a high temperature, so be careful when working to avoid burns.

5. When wet hands, liquid spills, or when exposed to high humidity, there may be induced electricity transmitted through the insulation layer to the outer shell. Please be sure to ground it

Line up and pay attention to ventilation. If the leakage is severe, please do not use it again. It should be dried in the sun or in an oven before use,

To avoid danger.

If you find that there is no power supply, please first check whether the right rear fuse needs to be replaced.

7. * When not in use, energy-saving, environmentally friendly, safe, and highly efficient digital ceramic electric heating sleeves should be kept clean and placed in a dry and non corrosive environment

Body preservation.