Endotoxin detector

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The WN10 endotoxin detector is required by the 2010 edition of the Chinese Pharmacopoeia for bacterial endotoxin testing. The reaction tube should be placed vertically in a suitable thermostat at 37 ° C and kept at that temperature for 60 minutes. According to this requirement, our company has developed an experimental equipment for bacterial endotoxin test by gel method - WN10 endotoxins detection thermostat.

Product Details

Endotoxin detectorWN10

WN10Endotoxin detectorProduct Introduction

Requirements for bacterial endotoxin testing method in the 2010 edition of the Chinese PharmacopoeiaThe reaction test tube should be placed vertically in a suitable thermostat at 37 ± 1 ℃ and kept warm for 60 ± 2 minutes. According to this requirement, our company has developed an experimental equipment for bacterial endotoxin test by gel method - WN10 endotoxins detection thermostat. Compared with the traditional constant temperature water bath, the WN10 type test tube thermostat has the following advantages and characteristics:

Product advantages

1The instrument adopts good heating technology and pulse temperature control technology, with a temperature control accuracy of 37 ± 0.15 ℃ and a temperature difference between test tube holes of ≤ 0.3 ℃. The temperature control accuracy of the traditional constant temperature water bath is only ± 1 ℃, and the temperature distribution is uneven. The water temperature near the heating tube is high, and the water temperature away from the heating tube is low, which can easily cause differences in the reaction of horseshoe crab reagents.

2The instrument is equipped with a timing device, and users can adjust the timing time arbitrarily within 0-99H59min; And there is an independent buzzing sound. 70 test tube wells of the instrument can be used simultaneously.

3The instrument is equipped with a dust cover, and the test tube is not sealed during use, making experimental operations more convenient and efficient. If using a traditional constant temperature water bath, the test tubes must be sealed, otherwise water vapor or small water droplets will enter the test tubes and cause contamination. Sealing each test tube one by one is not only troublesome and time-consuming, but also affects the accuracy of the experiment.
4. The instrument has been calibrated to a constant temperature before leaving the factory, and users do not need to adjust the instrument temperature. Just turn on the instrument preheating 15-20 minutes before each use, and the instrument temperature will be displayed on the screen.

5Each instrument has 70 test tube wells. The instrument can be customized with 2ml ampoules as reaction tubes and 10 × 75mm standard reaction tubes according to user needs. The instrument has a beautiful appearance, compact size, and is convenient to use.

WN10Product Features

1. Instant temperature display, time decreasing display

2. Automatic fault detection and alarm function

3. Buzzer alarm prompt function

4. Temperature deviation calibration function

5. Convenient module replacement for easy cleaning and disinfection

6. Built in over temperature protection device

7. Has interrupt pause function

8. LCDLCD display, membrane switch

Technical Specifications

1. Temperature control range: room temperature+5-100℃

2. Heating time: ≤ 20 minutes (from 20)℃Rise to 100℃）