-
E-mail
marketing@ytxinhai.com
-
Phone
153-1182-6613
-
Address
No. 188 Xinhai Street, Fushan High tech Industrial Zone, Yantai City, Shandong Province
Product Categories
- Wear resistant slurry pump
- Cleaning equipment
- Equipment accessories
- Automatic control equipment
- Wear resistant valve
- Dewatering equipment
- Gold selection equipment
- mixing equipment
- Mineral processing consumables
- Concentration equipment
- Flotation equipment
- Grading equipment
- screening equipment
- Crushing equipment
- Grinding equipment
Shandong Xinhai Mining Technology Equipment Co., Ltd
Efficient, low consumption, fast desorption electrolysis system
NegotiableUpdate on 02/25
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
A set of gold ore beneficiation equipment that obtains gold mud from gold loaded carbon through desorption and electrodeposition under high temperature and high pressure conditions.
Product Details
Advantages and Characteristics
Working principle
Technical Parameter
success cases
Related products
Advantages and Characteristics
Under high temperature (150 ℃) and high pressure (0.5MPa) conditions, the desorption rate reaches over 98%;
The desorption electrolysis temperature is the same and does not require heat exchange. Due to its fast operation, the power consumption is 1/4 to 1/2 of that of conventional systems;
The non-toxic desorption combination agent contains a charcoal activator, which has a regenerative effect on charcoal. Poor charcoal does not require pyrometallurgical regeneration, saving the cost of charcoal regeneration;
Cyanide free: No need to add sodium cyanide in the desorption solution, low cost, and minimal pollution;
Gold mud has high grade, does not require reverse electrolysis, and is easy to extract;
Safety: It has triple safety protection measures, namely system intelligence, automatic pressure limiting and releasing mechanism, and safety valve.
| Working principle | High efficiency, low consumption, and fast desorption electrolysis system flowchart |
The desorption electrolysis system adds anions that are easily adsorbed by activated carbon to the desorption system, thereby replacing Au (CN) 2- and achieving gold desorption. The precious liquid obtained by desorption of gold loaded carbon is recovered by ionization method to obtain solid gold. The Xinhai high-efficiency, low consumption, fast desorption and electrolysis device mainly consists of two parts: desorption and electrolysis. The desorption and electrolysis processes are separated, and the solvent is carried out in the comprehensive desorption tower. The precious liquid electrolysis is completed in an independent electrolysis cell. The four processes of solvent desorption, precious liquid heating, solvent condensation, and solvent recovery are concentrated in the comprehensive desorption tower. The precious liquid obtained by desorbing the gold loaded carbon with solvent vapor is introduced into the independently set electrolysis cell through pipelines for electrolysis, obtaining crude gold, and then purified to obtain finished gold. |
Technical Parameter | model | |
|---|---|---|---|---|---|
| Applicable scale | System equipment details | ||||
| System Instrument Details | operation parameter |
Mine scale (t/d) |
Raw ore grade (g/t) GJD-200 < 150 2-8 S1 desorption column S2 filter S3 electrolytic cell S4 circulating pump S5 electric heater S6 carbon injector S7 air compressor S8 desorption liquid tank S9 Clear Water Pump S10 acid storage tank S11 magnetic pump |
S12 carbon storage tank S15 control cabinet S16 silicon rectifier cabinet S17 acid pickling mixing tank B1 Resistance Remote Transmission Diaphragm Pressure Gauge B1 pressure indicator regulator B2 diaphragm pressure gauge B3 Vortex Flow Meter B3 flow integrator B4 Thermal Temperature Gauge B5 temperature sensor B5 temperature indicator regulator |
B6 diaphragm pressure gauge B7 level gauge B9 temperature sensor B9 temperature indicator regulator Dissolving solution: PH > 13.5 Batch usage: unlimited times Electrolysis begins: 100-110 ° C End of electrolysis: 150 ° C Electrolytic current: 350-1250 A |
| Electrolytic voltage: 2-4 V | Pressure at 150 ° C: desorption column | ||||
| Upper part: 0.50-0.57 MPa | |||||
| Electrolytic cell: 0.45-0.52 MPa | GJD-300 | ||||
| 150-300 | |||||
| GJD-450 | |||||
| GJD-500 | 300-500 | ||||
| GJD-600 | |||||
| GJD-750 | |||||
| GJD-1000 | |||||
| 500-1000 | GJD-1200 | GJD-1500 | |||
| GJD-1800 | |||||
| GJD-2000 | |||||
| 1000-2000 | 2-20 | ||||
| GJD-2500 | |||||
| GJD-3000 | |||||
| GJD-3500 | 2000-3000 | ||||
