Drain Gauge Soil Infiltration Meter

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The Drain Gauge G3 soil infiltration meter is installed below the root distribution area for monitoring, with a lifespan of over 10 years. When installing this equipment, drilling equipment, excavators, etc. can be used. In agricultural, grassland, and wastewater monitoring research, the collection system of this instrument can quickly extract leaked wastewater for analysis. The $r $n $r $nDrain Gauge G3 soil infiltration meter * seals the bottom, * eliminating the impact of high groundwater levels on soil infiltration data. The $r $n $r $nDrain Gauge G3 can also be equipped with sensors for soil moisture, soil temperature, conductivity, and other parameters.

Product Details

Main applications

Research on Water Balance
Monitor irrigation effectiveness during crop growth season
Determination and control of water and nutrient loss
Improvement of landfill system
Research on maximizing waste utilization in food processing
Lawn and other leisure and entertainment facilities management (such as golf courses, parks, green spaces, etc.)

Feature Overview
1. Bottom sealing to eliminate the influence of groundwater level
2. Branch control pipe material is optional, PVC or stainless steel
3. Optional soil moisture sensor, such as 5TE or 5TM
4. Optional rain gauge for real-time measurement of rainfall
5. If equipped with Em50G, remote data transmission function can also be achieved

土壤入渗仪

technical indicators

	drainage	水深	conductivity	temperature
scope	Lower part 0-61mm, upper part 61-100mm	0 ~ 3.5 m	0 ~ 120 dS/m	-11~ 49℃
resolution	0.2 mm	0.5 mm	0.001 dS/m	0.1℃
accuracy	±1.4 mm	±0.1 % @ 20 ℃	± 0.01 dS/m or ± 10% (whichever is greater)	±1℃
Specifications	Total length: 147 cm DCT length: 63.5 cm; DCT inner diameter: 25.4 cm Length of water storage pipe: 81.3 cm; Outer diameter of water storage pipe: 11.5 cm Connection tube length: standard 180 cm, other sizes can be customized; Outer diameter of access pipe: 6.0 cm (2 'schedule 40 PVC) Sample extraction tube: 1.27 cm outer diameter x 0.79 cm inner diameter x 3 m length (other lengths can be customized) Weight: 20 kg (stainless steel DCT), 14 kg (PVC DCT)
Extract elevation	110 cm (11 kPa)
Solution collection capacity	3.1 L (6.1 cm displacement) Extra capacity 5.1 L (10 cm displacement)
Solution collection area	507 cm²(Inner diameter 25.4 cm)
material	DCT (standard): 304 stainless steel, thickness 11; DCT (optional internal material): PVC Wick: Fiberglass Root inhibitor: BioBarrierTM, which can remove Sample discharge pipe: polyethylene Isolation and permeation material: Diatomaceous earth (DE) Other parts: PVC
Operating Temperature	0 ~ 50℃
power requirement	3.6-15 VDC, 0.03 mA static state, 0.5 mA 300 ms measurement period
measure time	300 ms
output	Serial TTL, 3.6 Volts 或 SDI-12
interface type	3.5mm stereo interface, or 3-head tinned bare wire
Support data acquisition (purchased separately)	Decagon Em50 series, ProCheck, Campbell Scientific
Compatible software	ECH₂O Utility (rev 1.64+), DataTrac3 (rev 3.4+)

Origin and Manufacturer:the United StatesMETERCompany_{(Former Decagon)}