Double end chamfering machine 2

NegotiableUpdate on 01/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

During the machining operation of the double headed end face chamfering machine, the following operating procedures should be followed: (1) When the CNC lathe is powered on, the operator must not open or touch the parts of the CNC lathe with lightning symbols or weak electrical equipment installed, in order to prevent electric damage

Product Details

The double headed end face chamfering machine should follow the following operating procedures during processing:
(1) When the CNC lathe is powered on, the operator must not open or touch the parts of the lathe that have lightning symbols or are equipped with weak electrical equipment to prevent electric damage.
(2) Pay attention to checking whether the product workpieces and cutting tools are clamped correctly and reliably; After the tool clamping is completed, manual methods should be used for trial cutting.
(3) When measuring product workpieces, it is necessary to do so while the CNC lathe is stopped.
(4) Do not place obstacles around the CNC machine tool, the workspace should be spacious enough.
(5) Before replacing the fuse of the double ended chamfering machine, the power supply of the CNC lathe should be turned off. Do not use your hands to recognize places with DC high voltage power supply such as motors, transformers, and main control boards.
(6) Do not touch the blade tip and iron filings with your hands. Iron filings must be cleaned with an iron hook or brush.
(7) Do not touch the rotating spindle, product workpiece, or other fitness parts with your hands or any other means.
(8) It is prohibited to measure or change speed during processing, and it is also forbidden to use cotton thread to wipe the product workpiece or clean the CNC lathe.
(9) During the operation of the lathe, the operator must not leave their post. If any abnormal situation is detected, the CNC lathe should be parked immediately.
(10) Regularly check the temperature of the motor of the double headed end face chamfering machine, and if it is too high, seek relevant personnel to conduct safety inspections.