Digital outer diameter continuous measuring instrument

Manufacturer of digital continuous measuring instrument for outer diameter (outer diameter instrument manufacturer), with durable quality and favorable price; Gather strength and make every effort to create a digital continuous outer diameter measuring instrument, outer diameter measuring instrument, outer diameter continuous measuring instrument, and outer diameter detection instrument. All employees look forward to providing you with thoughtful service. Sales phone: 0317-352090 3522080 QQ online: 191965034

1Digital displayContinuous outer diameter measuring instrumentpurpose

Digital displayContinuous outer diameter measuring instrumentUsed to measure the outer diameter value at any position of the pipeline, and also to measure the roundness of the pipeline.

IIDigital displayUsage method of continuous measuring instrument for outer diameter

1. Press the ON/OFF button to turn on the digital display screen switch, use your thumb to push the moving support wheel to the zero mark position, lock the locking screw, and press the yellow button ZERO button to return the reading to zero;

2. Release the locking device and pull the outer diameter continuous measuring instrument to the integer size position close to the measured size on ZUI. The integer size should be within 20mm of the measured size, and then lock the locking device (for example, for a 315mm pipe outer diameter, pull it up to 300mm);

3. When measuring, push the continuous outer diameter measuring instrument towards the pipeline, and the support wheel can automatically position at the outer diameter of the pipeline. The outer diameter value of the pipeline is the integer part plus the number displayed on the digital display block;

4. Slowly move the measuring instrument and rotate it 180 degrees. By observing the changes in the reading device, the outer diameter of each part of the measured pipeline can be read.

5. If necessary, this product can also be connected to a computer, and the measurement data of each point will be collected on the computer. At the same time, ZUI large, ZUI small, and average values can be obtained for various mathematical statistics and quality analysis.

6. If the number flashes, it indicates insufficient power. The front cover should be pushed open and the battery should be replaced in a timely manner before continuing to use.

IIIUse digital displayContinuous measurement of outer diameterInstrument timematters needing attention:

1. The reading of this product consists of two parts: the integer part and the number displayed on the digital display block;

2. This product cannot measure the position of workpieces with sudden and significant deformation.

3. When measuring workpieces, the measuring surface of the product must not be tilted.

4. When measuring the workpiece, the force should be uniform, based on the feeling that the four supporting wheels are in contact with the workpiece.

5. When measuring the workpiece, there should be no foreign objects on the workpiece and the measurement should be carried out at room temperature.

6. Handle with care and do not mix with corrosive gases or liquids.

4、 Product specifications:

contact point (Bearing)	50-115 mm
	115-320 mm
	320-635 mm