Digital oscillation incubator

HPY-2PtypeDigital oscillation incubatorInstruction Manual

1HPY-2PtypeDigital oscillation incubatorIntroduction:

It is a biochemical instrument customized according to customer needs, combining an incubator and a shaker with air as the thermal conductive medium. It is widely used in the cultivation, fermentation, hybridization, biochemical reactions of biological samples, as well as enzyme and cell tissue research. It is an equipment for scientific research, teaching, and production departments such as biology, viruses, plants, biological products, medical food, and environmental protection. This instrument adopts a DC brushless motor with constant speed, wide speed regulation, and can operate for a long time. Temperature control adopts pen segment LCD display, blurryPIDHigh precision control and temperature regulation, with stainless steel interlayer and double door design, providing excellent insulation performance, making it an ideal equipment for researchers.

IIHPY-2PtypeMain technical parameters:

1. Power supply voltage:220V 50HZ
2. Temperature control range: room temperature+5℃~50℃
3. Temperature control accuracy: ±0.5℃ Temperature uniformity: ±1℃
4. Shake amplitude:25mm
5. Temperature control timing:0~9999divide Oscillatory timing:0~9999divide
6. Shake table size:880mmDimensions: 1200 × 970 × 1400mm
7. Heating power: 1200W, oscillation power: 200W
8. Speed range: 30-300 revolutions per minute Accuracy: ± 0.5

IIIHPY-2PtypeUsage:

1Speed setting:

(1) Close the power switch, and the upper row will display the original speed value. (Last run speed) The lower row displays the original timing value

(2) Press the "" (speed) key to set the desired rotational speed.

(3) Press the H (hour) key to set the hour range, and press the M (minute) key to set the minute range. (Set 0:00 to indicate continuous operation in a constantly open state at irregular intervals)

(4) After setting all the data, press the RUN button to start, and press STOP to stop running at any time. (At this point, the timer also ends)

(5) Green is the running light, and red is the stop light. The corresponding indicator light is on, indicating that the controller is in the corresponding state.

2Temperature setting:Please refer to the user manual of the LCD thermostat controller.

4HPY-2PtypeNotes:

1To ensure, please connect the ground wire when using.

2Keep the instrument clean and dry.

3If the instrument malfunctions, first check the power supply, then check the internal circuit or notify our factory for repair.

Our factory's products:

(In addition to the following products, our factory can also customize instruments according to customer needs. Consultation)
Series of incubators, series of gas bath and water bath constant temperature oscillators, series of speed regulating multi-purpose oscillators, series of magnetic stirrers, electric stirrers, series of water bath pots, sand baths, water tanks, centrifuges, series of crushers, grinders, homogenizers, series of stainless steel electric heating plates, lifting tables, constant temperature plates, series of quartz sub boiling and stainless steel distilled water dispensers, series of electric furnaces, constant temperature carriers, series of analytical instruments.