DTP-6000 roundness tester

NegotiableUpdate on 02/01

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

DTP-6000 Roundness Meter DTP-6000 Roundness Meter Radial: (0.03+5H/10000) Axial: (0.03+6X/10000) Bearing Weight: 250Kg Measuring Diameter: 1000mm

Product Details

Measurement project
Measurement project	Measurable roundness, coaxiality, concentricity, runout, perpendicularity, parallelism, flatness, surface waviness (Wc, Wp, Wv, Wt, Wa, Wq), frequency spectrum analysis, wave height analysis, etc. of circular workpieces
measuring range
Maximum measurement diameter	φ1000mm
Maximum measurement height	650mm
Capacity	250Kg
Spindle Precision
Radial error of spindle H=to the height of the workbench	±(0.03+5H/10000)μm
Axial error of spindle X=distance to the center of the spindle	±(0.03+6X/10000)μm
workbenches
Table diameter	φ560mm
adjustment range	Adjust the eccentricity by ± 2mm; Adjust the level ± 1 °
Rotation diameter	φ1000mm
rotational speed	0-12 revolutions per minute
Horizontal arm (horizontal guide rail)
Horizontal movement distance	240mm
movement speed	0.5-6mm/S or manual
sensor
range	500 μ m (radius difference)
resolution	0.005μm
Measuring needle shape	2mm gemstone ball measuring head (with more diameters to choose from)
dynamometry	1-12g
data acquisition
data acquisition	14400 points per week (internationally recognized)
Magnification factor
Magnification factor	200000 times automatic
appraising method
appraising method	LSC (Least Squares Method), MZC (Minimum Region Method) MIC (maximum inscribed circle method), MCC (minimum circumscribed circle method)
Filter value
Filter value	1-500、1-150、1-50、1-15、3-16、3-17、15-500、17-100 upr
Data analysis and processing
Spectrum analysis	Analyze the amplitude of different frequency components
Abnormal data removal	Manually or automatically remove abnormal data such as burrs, holes, and bumps
file management	Measurement data is automatically saved and can be deleted
Data printing	Single or multiple measurement results can be printed on the same page in the same printing mode
INSTALLATION REQUIREMENTS
power supply	220-240V AC, 50HZ， Separate ground wire; Maximum power consumption 450W
compressed air	Pure compressed air: pressure 0.4MP, consumption 0.1m3/min (air supply 0.6MP, 0.25m3/min or above)
Environmental requirements	Working temperature: 10 ° -30 ° C (normal temperature); Humidity 20-80% RH (no condensation), good grounding, no obvious vibration source