Conductive adhesive and other bonding products

product number

describe

package

16084-6

PELCO Tabs ™， 6mmdiameter

100a flat/wrap

16084-3

PELCO Tabs ™，9mmdiameter

98a flat/wrap

16084-1

PELCO Tabs ™，12mm diameter

100a flat/wrap

16084-2

PELCO Tabs ™，25mm diameter

54a flat/wrap

product number

describe

package

16084-4

Spectro TabsDouble sided carbon conductive film,12mmdiameter

120a flat/wrap

product number

describe

package

16084-20

PELCO Image Tabs ™Double sided carbon conductive film,12mmdiameter

100a flat/wrap

product number

describe

unit

16056

DAG-T-502Conductive adhesive,30g

bottle

product number

describe

unit

16051

PELCO ®Graphite conductive adhesive, water-based,50g

bottle

Graphite conductive sprayGraphite Aerosol

Drying quickly, spraying onto the surface of the sample stage can form an ultra-thin and smooth surface, which has good adhesive properties for plastics, glass, and metals. Specifications:283.5g; Operating temperature:204℃； Electrical resistivity:1200 ohms/m2 @1mil.

Carbon conductive adhesiveLeit C Plast ™

No need for drying, high conductivity, high adhesive strength, can be used to bond large samples, has permanent plasticity, and can be used under ultra-high vacuum. Maximum operating temperature:120℃.Can be used together with a scraper.

Leitsilber 200Silver conductive adhesiveLeitsilber 200 Silver Paint

It is a reliable conductive adhesive material that dries quickly and has a smooth surface structure,
Silver content:45%； Electrical resistivity:0.02 - 0.04ohms/square； Drying time approximately10Minutes（20°C）； Maximum particle size:16µm；
Maximum operating temperature:120°C.

PELCO ®Silver conductive adhesivePELCO^®Conductive Liquid Silver Paint

Silver conductive adhesive, can cure at room temperature, has good bonding performance, and is suitable for any material. Samples such as ceramics, glass, metals, plastics, glass fibers, etc. can be bonded without special surface treatment before use. Using a bottle cap brush can facilitate the application of adhesive. If the silver gel dries, it can be diluted with a diluent.
Particle size: average less than1.0μmThe resistivity is0.02 ohms per square @ 1 milThick; Ingredients: Silver content60%; Operating temperature:-40°C－260°C.

PELCO ® one hundred and eighty-sevenSilver conductive adhesivePELCO^®Conductive Silver 187

lowVOCIt has strong anti-aging ability. The extremely thin curing film can produce strong conductivity. Before use, the surface of the sample table should be kept clean and dry0.015 ohms/sq/mil (25µm).

PELCO ®High performance silver pastePELCO^®High Performance Silver Paste

Designed for the dispersion of silver flakes in inorganic silicate aqueous solutions, especially under the following harsh application conditions:

• High temperature, up to927°C
• Ultra-high vacuum–No hydrocarbons, noneVOC
• low temperature

Has good thermal and electrical conductivity, isFESEM、XPS、ESCA、SIMS、AugerIdeal products for applications.

Quick drying silver conductive adhesiveFast Drying Silver Paint

It has fast drying characteristics while maintaining good conductivity..

• Operating temperature:105°C；
• Solid Content(silver)： 57.5－59%；
• Crosslinking agent: Thermoplastic resin;
• resistivity<0.015 ohms/sq/mil (25µm).

EPO-TEK ®Conductive silver epoxy resin pasteEPO-TEK^®Conductive Silver-Epoxy

There are two models:
H-22 Epo-Tek^®-Silver Tree Fat Cream/Liquid hardener: 100：4.5；
H20E Epo-Tek^®-Silver Tree Fat Cream/Liquid hardener:1：1.

General Performance
100%Solid, two-component silver epoxy paste, with soft, smooth, and thixotropic properties (viscosity can be reduced when stirred or shaken), making it particularly suitable for chip bonding in microelectronics and optoelectronics applications. It has good processing performance and a long lifespan at room temperature. Suitable for applications that require rapid curing, such as fast circuit repair, screen printing, etc., capable of withstanding temperatures up to400°C.

Conductive silver epoxy resin paste

H-22 Epo-Tek^®

Curing Time(Minimum bonding temperature/time)
150°C .........5minute
120°C .......10minute
100°C .......20minute
80°C .......45minute

characteristic:

• resistivity2 ohms/sq/mil
• cold storage: NOT REQUIRED
• high viscosity20，000cps

Curing Time(Minimum bonding temperature/time)
175°C........45 seconds
150°C..........5minute
120°C........15minute
80°C.........90minute

characteristic:
•Electrical resistivity:0.16 ohms/sq/mil
•Continuous use temperature:200°C
•Degradation temperature:410°C
•Refrigeration: No need.
•Low viscosity:2000cps

Epoxy silver pasteSilver conductive epoxy

It has strong adhesion and conductivity, and can be used for sample conductive connection, circuit repair, chip bonding, electrostatic discharge, and grounding. Operating temperature:-91°C－100°C

Silver conductive penConductive silver pen

A portable conductive pen that can accurately draw highly conductive silver tracks, jumper wires, and isolation wires. It can dry within a few minutes at room temperature, and the pen tip is easy to use. It can be welded at low temperatures and comes in two options: standard and fine pen tips. Can be applied to circuit board repair.

Gold conductive adhesiveConductive gold paste

Has antioxidant properties, can quickly dry at room temperature, and is used for analysis and testing that require strong signals. Refrigerate storage, pay attention to slowly returning to room temperature when using.

Gold content:75％； Particle size<2μmMaximum operating temperature:65℃.

Carbon conductive marker penConducting ink pen

Can be inSEMLabel the samples during analysis.

Tear stick double-sided conductive adhesiveConductive Lift-N-Press Adhesive Tabs，Double Sided

Containing a thin layer of highly conductive mucosa with a diameter of approximately12.7mmSubstances in the membrane99%The above is correctEDSTransparent analysis, including0.6%NiAnd below0.3%ofCu.

PELCO ® SEMsample stagePELCO ® SEM Specimen Preparation Station

This aluminum sample stand can be placed10Each sample holder is labeled with a corresponding number at each position. Applicable to three typesSEMSample holder:

• standard3.2mmNail shaped sample holder (applicable)FEI/Philips，ZEISS/LEO，Tescan，CamScan，Leica，Cambridge Instruments，AspexandRJ Lee SEM）
• 10mm Cylindrical sample holder (applicable)JEOL SEM）
• 15mmCylindrical sample holder (applicable)Hitachi SEM）

product number

describe

unit

15012

PELCO ® SEMsample stage

individual