Computer monitoring power aging vehicle

NegotiableUpdate on 05/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The computer monitoring power aging car produced by our company is a power aging rack that has been developed and tested for a year, with stability comparable to the world level. This power aging car can achieve temperature control and 220V/110V program ON/OFF function, and can also achieve one click setting of current and other parameters on the computer.

Product Details

Power Aging Rack Specification (FYD-BIC192)

1、 Aging rack name: Power aging vehicle
2、 Aging rack model: FYD-BIC192
3、 Aging capacity: 192PCS
4、 Aging rack function:
1. Aging function: using CEPT300 electronic load for pulling,
2. Monitoring function: The computer monitors the aging process of the product and automatically calibrates the aged good product by monitoring the output voltage value of the tested product in real-time.
3. Timer function: The aging time can be set within the range of 0.1-99H, with automatic timer function.
4. Mobile function: With a mobile structure, it is easy to move to the vicinity of the aging production line for aging.
5、 Main technical parameters of aging rack:
1. Car size: L1850 * W600 * H1850.
2. Car power: approximately 20KW, 380V, three-phase five wire.
The distribution of the trolley is calculated based on a single power supply of 300W, with 300W * 48 units/0.7 ≈ 20KW (product efficiency calculated at 70%). The total AC power of the trolley is 20KW, and the power input is 380V-4 line distribution.
Aging quantity: 192PCS
CEPT300 electronic loads are used for loading, with 8 CEPT300 loads installed on each floor of each aging vehicle. The vehicle is divided into 6 floors and a total of 48PCS of electronic loads are installed. CEPT300W/4CH (channel) electronic load, in CC Mode (constant current mode), each electronic load can age 4 75W power supplies, so each vehicle can age 192 power supplies below 75W.
The electronic load CEPT300 can also be used in parallel with 2 channels, so each electronic load can age 2 power supplies of 60-120W, and one vehicle can age 96 power supplies below 60-120W. The electronic load CEPT300 can also be used in parallel with 4 channels, so each electronic load can age one 120-240W power supply, and one vehicle can age 48 120-240W power supplies.
4. The trolley is divided into a testing area and a load area, with a terminal board installed in the middle isolation section.
5. The entire vehicle adopts electronic load type, and the load size can be adjusted according to demand (the load current can be set uniformly by one key);
6. The upper and lower limits of the voltage of the tested product can be set, and the output voltage value of the tested product can be monitored in real-time;
7. Each group of loads is indicated by LED to display the load status, and the tested product is automatically determined;
8. The electronic load module has OTP (over temperature protection function);
10. Each layer of the product placement area is equipped with perforated panels to facilitate temperature communication between the layers;
11. The aging car is equipped with multiple grounding protections to ensure safe use;

Shenzhen Fuyida Instrument Co., Ltd

Main products: Aging Room, Aging Testing System, Walk in Constant Temperature and Humidity Room, High Temperature Constant Temperature Test Chamber, High Temperature Aging Test Chamber, Steam Aging Test Chamber, Industrial Low Temperature Storage Box, Moisture proof Box, UV Lamp Weathering Test Chamber, Sand Dust Test Chamber, Xenon Lamp Weathering Test Chamber, Ozone Aging Test Chamber, Constant Temperature Water Tank, Oil Tank, Low Temperature Constant Temperature Tank and other testing equipment and instruments.