Cement floor roughening machine

Cement floor roughening machine

Pulling machine www.gzfussen.com

: Chen

（1） The advantages of the woolen machine:

Efficient, energy-saving, environmentally friendly, and labor-saving.

（2） The technical advantages of the carding machine:
(1) The use of high-pressure water can effectively break down the surface cement slurry layer, allowing cement paste and tile adhesive to better penetrate the wall and achieve permanent fixation; And due to the presence of water, it can serve to maintain the walls and clean the surface of lightweight structures.
(2) No need for secondary patching, no more problems such as hollowing, cracking, or detachment.
(3) After roughening or chiseling treatment, the surface is clean and rough, and the bonding strength of waterproof coating is more guaranteed.
(4) Experimental results have shown that when using tile adhesive to patch tiles after roughening, the fracture layer occurs inside the tiles or between the tiles and the adhesive, and has no effect on the wall.
（5）High pressure water gun carding machineThe machine only requires two people to operate, and the completion efficiency is several times that of manual labor, meeting the requirements of interlaced construction and saving efficiency.

(3)Technical Requirements

1. Operator: Each machine is equipped with 4 people, including 1 captain and 3 operators;

2. Water connection requirements: It is necessary to provide a source of tap water and ensure that the water flow rate of tap water is ≥ twice the water flow rate required by the carding machine, so that the precision purification and filtration system and hydraulic power device of the equipment can work normally, otherwise it will cause serious damage to the equipment;

3. The captain or on-site electrician shall connect the mechanical and electrical cables, and the power air switch shall meet the normal usage requirements of the equipment;

4. Conduct a post construction inspection and acceptance once a day.

(IV)construction process

Equipment location - Connect water and electricity - Connect high-voltage pipes and hair guns - Test machine - Perform wall hair pulling operation

Cement floor roughening machine

（5） Acceptance criteria

1. Pulling depth: 0.5mm-1mm;

2. Pulling density: ≥ 1 water line groove per square centimeter;

（6） Pulling instructions and diagrams

A1. High pressure water roughening equipment:

a. High pressure water roughening technology is a new technology specifically designed for the treatment of building walls;

b. Environmentally friendly, energy-saving, labor-saving, time-saving, efficient, and reliable;

A2. On site construction:

a. On site construction personnel must wear safety helmets and take corresponding safety protection measures;

b. During on-site construction, except for the operators, no one is allowed to approach the hair pulling gun3Places beyond meters;

A3. Standard effect of brushed molding:

a. Pulling depth:;

Pulling density: ≥ per square centimeter1Root canal groove;

A4. Pulling and Pulling Experiment:

a. After the pull-out test, the faults are all present inside the tile adhesive or cement paste, and are not related to the pulling. The adhesion after pulling meets the construction standards;

（7） Safety measures and civilized construction

1. Provide safety education to all personnel on the construction site and equip them with safety protective equipment;

2. All personnel entering the construction site must wear safety helmets and fasten safety belts;

3. Construction carding equipment must be placed in a safe and reliable location, avoiding areas with high pedestrian traffic;

4. Pulling guns are prohibited from facing the human body at any time;

5. It is strictly prohibited to work under the influence of alcohol or fatigue;

6. It is strictly prohibited to play and frolic on the construction site.

In addition to the carding machine, other products of Fushen *:

High pressure cleaning machine www.fussen.. ｃｏｍ.cn