CAL thermostat CAL sterilizer thermostat CAL temperature controller

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CAL thermostat CAL sterilizer thermostat CAL temperature controller ET2011-T-SM-P $r $nCAL thermostat, temperature/temperature control, 16A relay and solid-state relay, 9-30V DC/7-24V AC, with three process outputs, which can be 3 relays or 2 relays plus a universal output. This universal output can be used to operate solid-state relays, continuous current/voltage output, or excite dual line transmitters.

Product Details

CAL thermostat CAL sterilizer thermostat CAL temperature controllerET2011-T-SM-P

The universal temperature controller ET2011 is suitable for general, precise, and low-cost control tasks in all branches of industry. For this purpose, the device provides simple two-point (on/off) control, continuous PID control, or three-point step control. The process value signal is connected through a universal input. The auxiliary analog input can be used for heating current measurement or as an external setpoint input.

A thermostat is a device that directly or indirectly controls one or more heat and cold sources to maintain the required temperature. To achieve this function, a thermostat must have a sensitive element and a converter. The sensitive element measures temperature changes and has the required effect on the converter. The converter converts the action from sensitive components into a device that can control the temperature appropriately.

Technical data

Accuracy of displayed readings (decimal)	0，1°C:-99，9 - 300，0； 1 degree Celsius: -200-600
Warning	Over, under, with alarm
approve	Chief Executive, Electromagnetic Compatibility, Restriction of Hazardous Substances
Control method	PID or on/off
depth	73 millimeters
Digital height	12 millimeters
Digital signal input	no
display	7-segment, 4-digit red LED display screen
frequency	50-60
Current isolation	Between power supply and input/output
Delay adjustable	One ..50℃
instruction	Each output red light-emitting diode
input	Thermocouples J, K, T, S, R
IP Class	IP65
logical output	12 Vdc， 20mA (control only)
memory	Programmable read-only memory (less than 10 years)
Moisture resistance	80% relative humidity, non condensing
increase	panel mounting
digit	four
output	Logic (Solid State Relay), Relay
Panel Size	35x77mm
power consumption	5 volt amperes.
Relay function	Not applicable
sampling	100 ms
Set lag	1-50℃
Gao storage temperature	70℃
Di storage temperature	-25℃
power supply voltage	24V AC/DC
The heat-resistant shell comes from	0 ° C
Temperature resistant shell to	50℃
weight	200 g

CAL thermostat CAL sterilizer thermostat CAL temperature controllerET2011-T-SM-P