CAL Temperature Controller CAL Plastic Processing Temperature Controller CAL Thermostat

NegotiableUpdate on 01/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

CAL thermostat CAL plastic processing temperature controller CAL thermostat ET2412-230-08 $r $nCAL ET2412 thermostat, NTC, 2 x 8A relay, 230V AC, room temperature regulator can be used to provide various control functions, such as heating control; Heating cooling control; Day and night control (controlling at lower temperatures at night); Multi level control, which can perform one or more levels of heating, one or more levels of cooling, or a combination of multiple levels of heating and cooling control.

Product Details

CAL Temperature Controller CAL Plastic Processing Temperature Controller CAL ThermostatET2412-230-08

The ET2412 limit controller has undergone type testing in accordance with DIN standards.

ET2412 can be used for heating and cooling processes. Suitable for all thermocouple types and resistance sensors. It is particularly suitable for all applications where high or low temperature faults may cause fire or other hazards. Heating systems in buildings comply with DIN EN 12828, large hot water boilers comply with DIN EN 12953-6, and heat transfer devices and fuel devices with DIN 4754 organic heat transfer media comply with DIN 4755.

feature

Suitable for heating and cooling applications

All types of thermocouples and resistance sensors

BluePort front-end interface and BlueControl software

• Maintenance Manager and Error List

Reset the alarm by pressing the reset button

Reset alarms through numbers

Conduct type tests according to EN 14597 and cULus

Standard: EN 14597 (Replaced DIN 3440) Certified

Technical data

Warning	Over, under, with alarm
approve	Chief Executive, Electromagnetic Compatibility, Restriction of Hazardous Substances
Control method	On/off with adjustable hysteresis
depth	61 millimeters
Digital height	12.5 millimeters
frequency	50-60 Hz
Current isolation	Between power supply and input/output
instruction	Red light-emitting diode for output status
input	NTC, 10k ohms @ 25 ℃
IP level front-end	IP65
memory	Programmable read-only memory (less than 10 years)
Moisture resistance	80% Rh, non condensing
increase	panel mounting
digit	four
Panel Size	35x77mm
power consumption	3 volt amperes larger
Relay function	1 carbon to oxygen ratio, 1 nitrogen to oxygen ratio
relay output	8 A， 250V AC, resistive load
sampling	100 ms
Gao storage temperature	70℃
Di storage temperature	-25℃
power supply voltage	230V AC
The heat-resistant shell comes from	0 ° C
Temperature resistant shell to	50℃
weight	215 g

CAL Temperature Controller CAL Plastic Processing Temperature Controller CAL ThermostatET2412-230-08