Welcome Customer !

Membership

Help

Beijing Hengtai Fengke Experimental Equipment Co., Ltd
Custom manufacturer

Main Products:

mechb2b>Products

Beijing Hengtai Fengke Experimental Equipment Co., Ltd

  • E-mail

    bjhtfk@163.com

  • Phone

    15910924185,13521311282

  • Address

    No. 53, East Fourth Ring South Road, Chaoyang District, Beijing

Contact Now

Box type rain test device

NegotiableUpdate on 02/02
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

The outer shell material of the box type rain test device is made of high-quality stainless steel plate with textured treatment, and the inner liner material is made of stainless steel light plate. Large area visible glass door for easy observation of the condition of the tested sample inside the test chamber.

Product Details

Box type rain test device

1Box type rain test deviceCompliant with standards:

GB4208-2008Shell protection level (code IPX3, IPX4);

GB4706.1-2005General safety requirements for household and similar electrical appliances;

GB7000.1-2008General safety requirements and tests for lighting fixtures;

GB/T10485-2007waterproof test.

2、 Product Usage:It is mainly used to test the performance of products during storage, transportation, and use in rainy weather environments. It is mainly used to test the physical and other related properties of electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles, and their parts under simulated rainy weather conditions. After testing, the performance of the product can be judged through calibration to determine whether it can meet the requirements for product design, improvement, calibration, and factory inspection.

IIIStructural features:

1.The outer shell material of the box is made of high-quality stainless steel plate with textured treatment, and the inner liner material is made of stainless steel light plate.

2.Large area visible glass door for easy observation of the condition of the tested sample inside the test chamber.

3.Swing tube swing: The swing tube control system adopts automatic control through a stepper motor, and the swing tube angle and speed can be set through instruments.

4.Water pump supply, flow (pressure) regulating valve. The water supply tank is equipped with a water quality filter, an inlet float valve, and a drain valve. If heating is required, an electric heating tube and a temperature controller can also be installed in the water tank. The sewage system is designed to quickly discharge water at the bottom of the box without accumulating water.

5.Nozzle: The bending radius of the swing tube is determined by the size of the specimen and the internal volume of the box. The nozzle is a foldable nozzle, and the spray hole can be changed at any time according to the required aperture of the standard. The spray direction can be adjusted to ensure that the water droplets are evenly sprayed and the flow rate is sufficient.

6.A sample table with adjustable speed, made of stainless steel, with a motor rotating and a reducer adjusted to the appropriate speed.

7.The bottom adopts high-quality fixable designPUActivity wheel, convenient for users to move.

4Specifications and Technical Parameters:

model

HT/LY500

HT/LY1000

studio dimensions

800×800×900

1000×1000×1100

Overall dimensions

1070×1350×1850

1090×1430×1850

sex

can

point

mark

Spray ring radius

370mm

450mm

水管直径

φ18mm

Nozzle diameter

φ0.4mm

Spray hole spacing

50mm

Pipe swing amplitude

180°±200

Swing tube speed

60°/S

Rainwater pressure

Approximately 98-106Kpa water spray pressure

Test bench speed

1r/minIt can also be used for stepless speed regulation (optional)

transport

line

control

manufacture

be

unify

controller

Imported FM frequency converter

Time Controller

Imported programmable time computer integrated controller

Water pressure control

flow meter

water supply system

Water storage tank, booster pump

Pipe angle

Adopting PLC driven stepper motor (angle can be set and displayed arbitrarily)

Standard Configuration

Several nozzles and needles

safety protection

Leakage, short circuit, motor overheating, audible alarm, grounding protection

5、 Electrical control system:

1.The time controller adopts the German "Golden Bell Moller" programmable controller or the domestic brand "Dahua";

2.The swing rod speed controller and turntable speed controller both use Schneider frequency converters;

3.Both water pumps and flow meters are made of domestic brands;

4.Time relay: LCD display, 1-999.9 hours

5.Other electrical accessories are made of high-quality brand products, such as Schneider AC contactors, Omron intermediate relays, Delixi fuses, etc.

Free home delivery and installation and debugging instructions (until the customer's employees operate independently and are satisfied)

after-sales service

1One year warranty,lifetime maintenance

2Regular follow-up visits, listening to customer suggestions, and establishing customer service records;

3We promise to provide * and usage guidance services to our customers1We promise to respond within hours and send technical service personnel to the site for resolution24Dispatch personnel within hours (excluding special circumstances such as statutory holidays);