BO-301 Multi axis Rotary Table Screw Locking Machine

NegotiableUpdate on 09/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

BO-301 Multi axis Rotary Table Screw Locking Machine Multi axis Fixed Automatic Screw Locking Machine Composition and Design Description (1) Structural Composition: Mainly composed of screw automatic conveying system, screw locking mechanism, electrical control system, etc. (2) Product replacement: The fixture can be directly replaced, and the axis position can be adjusted. (3) The time to lock a product is around 3 seconds. (The length of the screws varies slightly). (4) The locking screw is: the provided sample automatic screw allows a dimensional tolerance of ± 0.2mm for incoming materials. (5) The locking product is: based on the product sample provided by the customer. (6) Fixture: According to product design, precise positioning and easy replacement are required. (7) During the use of the equipment, the product must not be damaged (such as deformation, scratches, appearance damage, etc.). (8) Reliability and stability: Under the premise of qualified product quality, the equipment can work continuously and stably every day with a low failure rate, and is suitable for large-scale production of single products;

Product Details

Advantages of Multi axis Fixed Automatic Screw Locking Machine
1. Lock multiple screws at the same time, which can replace multiple workers; For example, an 8-axis automatic screw locking machine can lock 8 screws at the same time. The number of axes can be customized according to customer requirements.
2. The machine has the highest cost-effectiveness and can usually recover costs within one year;
3. Manual operation only involves picking and placing products, while the machine automatically locks the screws and can determine if they are correct
Lock it properly. If there are products with poor locking, the machine will give an alarm prompt, making it easy to distinguish defective products.
4. The electric screwdriver transmits torque through a universal drive shaft and locks the screw, making it easy to adjust the screw hole position,
Changing product varieties is easy.
5. Good universality. Can remove a certain electric screwdriver without locking the screws.
6. Using a turbine feeding method, compared to traditional vibrating discs or lifting methods, it does not cause material jamming. Smaller size and noise, easier maintenance.
7. The machine is simple and practical, and employees quickly master the operation and debugging;

8. The machine can be placed on the table or an aluminum frame can be purchased separately (customized according to your company's requirements);

Performance parameters of multi axis fixed automatic screw locking machine

1. The number of locking axles can be selected from 2-12 axles.

2. Leakage lock/floating lock/sliding tooth detection can be optional for customers.

3. High reliability and durability, all electrical and gas systems use original imported components.

4. The spindle position and height can be adjusted to adapt to rapid replacement of different products.

5. It can be used in conjunction with assembly lines to achieve fully automated operations.

6. Locking speed: 2-5 seconds/PCS, depending on the length of the screw.

7. Torque adjustment: Each axis can be adjusted separately.

8. Gas source: 5-7kg/cm2.

9. Gas source: Power supply: 220V 50Hz, power 300W.

10. Suitable screws: M1-M8.

11. Suitable products: toys, optoelectronics, computers, plastics, and other products.

machine construction	Machine gross weight:	Approximately 150KG (depending on the customer's product)
	Overall dimensions:	Height 1900 * Length 800 * Width 600 (depending on customer product)
	Power Supply:	AC 220V 50HZ
	Power:	0.3KW
	Gas consumption:	15m3/hour
	frame:	Steel plate countertop, aluminum alloy frame
Control instructions	Host program control	Mitsubishi PLC control
	human-machine interface	Taiwan Weilun
	Machine startup	Dual hand start mode
	call the police	Alarm light flashing and buzzer whistling
connect	Universal joint&coupling components	Universal joint connection
Send screw machine	Automatic nail feeding machine	Place it next to or below the machine
Send screw machine	Number of automatic nail feeding machines	According to the number of locking screws, one machine can be equipped with 2 screws
screwdriver	Taiwan Qilisu Electric Batch	Taiwan Qilisu Electric Batch
Scope of Application	Applicable product size:	Customized according to customer products
	Horizontal adjustment range:	Customized according to customer products
	Vertical adjustment range:	Customized according to customer products
	Depth of screw locking:	Customized according to customer products
	Minimum screw hole distance:	20mm， Unlimited maximum hole spacing
Testing items:	Screw slippage detection	have
	Screw leakage detection	have
	Screw leakage detection	have
	Handling of locking defective products	Alarm light and buzzer prompt

ordering instructions
1.Product screw determination: Confirm whether the product and screws are feasible,Free on-site inspection and machine testing.
2.Price determination of the plan: Provide quotations, plans, or similar product cases.
3.Sign contract: Sign the contract and provide screw samples500Grain, product sample2-3One, debug and test the machine for use.