BHC-A-G1/2 straight through explosion-proof wiring box

BHC-A-G1/2 straight through explosion-proof wiring boxScope of Application
Explosive gas environment in Zone 1.1 and Zone 2.
2.20 Zone, 21 Zone, 22 Zone combustible dust environment.
3. Suitable for IIA, IIB, IIC explosive environments
4. Suitable for environments with temperature groups T1-T6.
BHC-A-G1/2 straight through explosion-proof wiring boxTechnical parameters
1. Environmental temperature -10 ℃ -+40 ℃;
2. Relative temperature: ≤ 95% (at+25 ℃);
3. Atmospheric pressure: 86-106KPa;
4. There are explosive gases and coal dust and other explosive substances in the environment;
5. There should be no corrosive gases in the environment;
Product Features
1. The product has an increased safety structure;
2. The shell is made of cast aluminum alloy and adopts a high-temperature one-time die-casting molding process. The surface is smooth and the appearance is exquisite and beautiful. The metal structure has high density, no bubbles or sand holes inside, good impact resistance (up to 7J), good explosion-proof performance of the shell, and the * explosion-proof mark is directly pressed on it;
3. The product shell undergoes high-speed shot blasting cleaning and then adopts high-voltage electrostatic spraying technology. The plastic powder has strong adhesion and good anti-corrosion, anti-oxidation, anti-static and other properties;
4. The joint surface between the product body and the cover is sealed with rubber, which has good sealing and waterproof performance;
5. There are various structural forms that customers can choose according to their needs;
There are also products made of different materials such as cast steel explosion-proof wiring boxes and stainless steel explosion-proof wiring boxes, which are suitable for different requirements and occasions for customers to choose from;
Selection Guide:
A: Direct explosion-proof wiring box B: three-way explosion-proof wiring box C: four-way explosion-proof wiring box
D: Left bend explosion-proof wiring box E: Right bend explosion-proof wiring box F: Back cover bent explosion-proof wiring box
G: Back cover three-way explosion-proof wiring box H: Yuanbao type explosion-proof wiring box
Ordering Notice
Explosion proof mark: Exe II;
Protection level: IP54;
Thread specification: Pipe thread
Pipe diameter: DN15, DN20, DN25, DN32, DN40 and above in various specifications
Diverse structural forms and easy installation;
Meets the requirements of GB3836-2000 and IEC60079 standards;
Transportation and after-sales instructions:
1. The outer shell of this product is made of aluminum alloy material, which is relatively heavy. It is recommended to use logistics. As it is entrusted to a third party for transportation, the user should check for any damage when picking up the goods. If there is any damage, please contact our company at * time. After that, we will negotiate or purchase according to the user's weight.
2. If there are any quality problems with this product within one year from the date of manufacture, the components will be replaced free of charge. If the damage is caused by other reasons, the company will charge relevant cost fees.
3. If the user's order is incorrect and the product does not meet the on-site requirements, or if additional components need to be added, the cost will be borne by the user. If it is caused by our company, it will be redone free of charge.