Automatic pop-up drawer style oven from Japan's East Thermal Department

Product Introduction

Automatic pop-up drawer style oven from Japan's East Thermal Department

The typical dryer for ATO-101/HO-101 will experience a temperature drop of approximately 20-30 ℃ when placing or removing the sample, which affects the drying and curing of the sample. The use of an automatic discharge surface baking test chamber can maintain stable baking temperature and time, thereby obtaining reliable data.

Automatic pop-up drawer style oven from Japan's East Thermal Department

ATO-101

Zui high temperature 350?Ｃ

Common temperature for testing 50－300?Ｃ

Temperature accuracy and temperature distribution exist300?Temperature accuracy at C ±1.5?Ｃ，

Test piece size 230 × 330mm (largest)

Internal material SUS304 1.5t

wind speed 0.5-5.0m/color c adjustable

power supply Three phase 380V/50Hz

rated power 6.93kw

External dimensions W1140×H1760×D930mm

Time setting range 0-999.9 seconds

Automatic discharge device Tray size: 230 * 330mm

Tray pushing distance: 100mm

Safety device - overheat regulator The overload protection of the air supply motor is set to 6.5A.

0-400?C overheat protection.

Top cover anti riot device.

Generally, when using several dryers, most of them are door opening and closing type. The set temperature for door opening and closing is between 200~300 ℃ and 30~60 ℃, and the temperature drops. It is very difficult to evaluate the quality of the test piece.

So it was developed that the drawer type automatic discharge dryer tray, painted board drawer, and printing tray could achieve high-precision quality evaluation under the first evaluation test conditions with only a temperature change of 1 ℃ after breaking through.

In addition, if the polyurethane board on the tray is automatically discharged from the lower level discharge port. If the wind speed is 1~5 m/color c, it can be changed.