Automatic liquid chromatography separation chromatography instrument 2001-B-III

1、 Product Introduction

Brief introduction:

Automatic liquid chromatography separation chromatography instrument2001-B-III configuration: HD-2000Nucleic acid protein detectorOne HD-A chromatography collector, one BT-100SD constant flow pump, one DBS-100 partial collector, one chromatography column of 1.0 × 50cm, 1.0 × 70cm, 2.6 × 50cm each, and one titration table. Automatic liquid chromatography separation chromatography instrument 2001-B-III

Details introduction:

The automatic low-pressure liquid chromatography separation chromatography instrument independently developed and produced by our company is a modern analytical experimental instrument used in industries such as life science research, agricultural research, chemical engineering, food science, as well as universities and medical institutions.Nucleic acid protein detector/UV detectorThe series of products are used in automatic liquid chromatography separation chromatography to separate substances with ultraviolet absorptionThe principle of the UV detection device for proteins, nucleic acids, peptides, and enzymes is to compare and analyze the composition of the sample based on the obvious absorption of ultraviolet light by the substance (sample), in order to identify and detect the protein and nucleic acid substances in the sample and determine their content. The JP series automatic liquid chromatography separation chromatography instrument can directly read the optical density A value, and has wavelength accuracy and repeatability, good monochromaticity, and can directly record the relative peak values of each peak area in qualitative and quantitative analysis, and calculate the relative mass content; The instrument is equipped with a collector, a constant flow pump, some collectors, a gradient mixer, and chromatographic columns to form a complete set of automatic liquid chromatography separation and analysis device, which can meet the use requirements of gel permeation chromatography, affinity chromatography, ion exchange chromatography and other chromatographic analysis, and has a performance price ratio.

Automatic low-pressure liquid chromatography separation chromatography instrument2001-B-III has a micro sample pool for continuous detection. During the column chromatography separation and analysis process, the eluent flows through the sample pool, and the chromatography analyzer can automatically draw the sample separation spectrum (absorption peak or transmission peak). At the same time, it can detect the distribution of the required sample in some collector tubes and monitor the column chromatography process at any time. Especially in the exploratory experimental process, the elution conditions can be changed in a timely manner to quickly obtain a reliable experimental plan and achieve the separation of biomolecules.

2、 Product Features

It can quickly meet the requirements of gel permeation chromatography, affinity chromatography, ion exchange chromatography and other chromatographic analysis.

Can directly read the optical densityA value, as well as wavelength accuracy and repeatability.

The flexible modular configuration of instruments makes the scientific research process more intuitive.

Adopting precision constant current pump, stability, and low pulse.

Fully automatic partial collector, with multiple collection modes and configurable collection tubes of various specifications.

Automatically draw tomographic maps, display and save tomographic data.

3、 Technical parameters

Automatic liquid chromatography separation chromatography instrumentConfiguration of 2001-B-III: 1 HD-2000 nucleic acid protein detector, 1 HD-A chromatography collector, 1 BT-100SD constant flow pump, 1 DBS-100 partial collector, 1 chromatography column of 1.0 × 50cm, 1.0 × 70cm, 2.6 × 50cm each, and 1 titration table. ★ Compatible with GE chromatography column interface, can perform pre separation in equipment systems such as AKTA. New microcomputer chip control, displaying 3 OD values, allowing users to directly read the optical density A value. Wavelength: 220nm (optional), 254nm, 280nm, 340nm (optional) Software: capable of computer graphics, data analysis, calculation, and printing. ★ Speed resolution: 0.1 revolutions per minute to 150 revolutions per minute, adjustable in both directions, flow rate: 1-14500ml/h; ★ Filling function: timed operation: 1 second -9 hours 59 minutes 59 seconds, timed sleep: 0 seconds -9 hours 59 minutes 59 seconds; Flow accuracy: ± 1%. ★ The collection tray is designed with numerical markers, with each test tube corresponding to one number, ensuring that the test tubes are correctly labeled for retrieval. Collect test tubes: 100 tubes, each with a larger capacity of 12ml. The timed collection range is 1 second to 1999 hours, 59 minutes, and 59 seconds. The drip collection range is 1 drop to 9999 drops, which can be selected arbitrarily. The peak collection range is 0-100mv. The ultra large blue film LCD clear display mode is used; One chromatography column of 1.0 × 50cm, 1.0 × 70cm, 2.6 × 50cm each, and one titration table set.

Juchuang Environmental Protection provides you with comprehensive technical support and perfect after-sales service! Details consultation:!

It can quickly meet the requirements of gel permeation chromatography, affinity chromatography, ion exchange chromatography and other chromatographic analysis.

It can directly read the optical density A value, with wavelength accuracy and repeatability.

The flexible modular configuration of instruments makes the scientific research process more intuitive.

Adopting precision constant current pump, stability, and low pulse.

Fully automatic partial collector, with multiple collection modes and configurable collection tubes of various specifications.

Automatically draw tomographic maps, display and save tomographic data.

Automatic liquid chromatography separation chromatography instrumentConfiguration of 2001-B-III: 1 HD-2000 nucleic acid protein detector, 1 HD-A chromatography collector, 1 BT-100SD constant flow pump, 1 DBS-100 partial collector, 1 chromatography column of 1.0 × 50cm, 1.0 × 70cm, 2.6 × 50cm each, and 1 titration table. ★ Compatible with GE chromatography column interface, can perform pre separation in equipment systems such as AKTA. New microcomputer chip control, displaying 3 OD values, allowing users to directly read the optical density A value. Wavelength: 220nm (optional), 254nm, 280nm, 340nm (optional) Software: capable of computer graphics, data analysis, calculation, and printing. ★ Speed resolution: 0.1 revolutions per minute to 150 revolutions per minute, adjustable in both directions, flow rate: 1-14500ml/h; ★ Filling function: timed operation: 1 second -9 hours 59 minutes 59 seconds, timed sleep: 0 seconds -9 hours 59 minutes 59 seconds; Flow accuracy: ± 1%. ★ The collection tray is designed with numerical markers, with each test tube corresponding to one number, ensuring that the test tubes are correctly labeled for retrieval. Collect test tubes: 100 tubes, each with a larger capacity of 12ml. The timed collection range is 1 second to 1999 hours, 59 minutes, and 59 seconds. The drip collection range is 1 drop to 9999 drops, which can be selected arbitrarily. The peak collection range is 0-100mv. The ultra large blue film LCD clear display mode is used; One chromatography column of 1.0 × 50cm, 1.0 × 70cm, 2.6 × 50cm each, and one titration table set.