Advanced Ba class flowmeter

Advanced Ba class flowmeterProduct Details
Bar flowmeterenergy savingDue to the fact that the intelligent probe of the measuring element is made of Φ 20mm stainless steel, its cross-sectional area is very small and there is almost no pressure loss in the medium pipeline, which greatly reduces the operating cost. Compared with throttling devices such as orifice plates, it has a significant energy-saving effect.

High temperature and high pressure resistance: The intelligent probe of the primary component is made of 1Cr18Ni9Ti stainless steel (special steel is selected according to different media), which can withstand high temperatures of 650 ℃ and high pressures of 32MPa.
High reliability: Due to the simple structure and reasonable design of the probe, the medium inside the pressure tube does not flow and debris is not easy to enter, thus maintaining measurement accuracy for a long time.
Easy installation: Simply drill a suitable hole in the pipeline and insert the primary component probe into the center of the pipeline for easy installation.
No maintenance required: The primary measuring element probe itself does not require maintenance, only the zero and full calibration of the differential pressure transmitter according to the regular calibration requirements of the measuring instrument, as well as the calibration of the corresponding current input of the secondary meter.
Wide measurement range: Accurate measurement is possible for flow rates ranging from 0.2 t/h to 50000 t/h. The measurement effect is particularly good for low flow rate, small flow rate, and large pipe diameter.

Advanced Ba class flowmeter
The cross-sectional shape of the medium pipeline has a wide range of applications: this flowmeter has no requirements for the geometric shape of the medium pipeline cross-section, and is suitable for circular, elliptical, square, rectangular, angular, triangular, trapezoidal, etc.