500L/H fully automatic reverse osmosis purified water equipment

1500L/HAutomatic reverse osmosis purified water equipmentParameters:

Raw water: tap water, well water, groundwater, river water;
Inlet pressure: 0.2~0.3MPa;
Operating pressure: 0.3~1.5MPa;
Desalination rate:>99%
Water production rate: 0.5T/H (can be determined according to customer needs);
Conductivity of water production:<10 μ s/cm, 5 μ s/cm, 2 μ s/cm, etc;
Control: Fully automatic control of integrated multi way valve;
Material: The whole machine is made of stainless steel 304 material;
Process: Reverse osmosis membrane separation technology.

II500L/HFully automatic reverse osmosis purified water equipmentProduction process flow:
Raw water tank → Raw water pump (stainless steel) → Quartz sand filter (stainless steel) → Activated carbon filter (stainless steel) → Precision filter (stainless steel) → High pressure pump (stainless steel) → Reverse osmosis host (stainless steel) → Purified water tank → Water point;

III500L/HComposition of fully automatic reverse osmosis purified water equipment:
The core part of reverse osmosis purified water equipmentreverse osmosis membraneSelect accessories from foreign manufacturers and use multi-stage pre-processing filtrationSingle stage reverse osmosis、Secondary reverse osmosis、EDIAdvanced foreign treatment technologies such as regeneration mixed bed, nuclear grade mixed bed resin purification, and dual wavelength ultraviolet digestion, as well as the process design of Green Health Water Treatment Company, ensure the performance and stability of the product. The small-scale fully automatic reverse osmosis purified water equipment has completed integrated design, integrating pre-treatment systemRO systemThe ultra pure water system and post-treatment system are integrated, easy to operate and maintain, and can also be easily upgraded according to user needs.

4500L-HPrecautions for fully automatic reverse osmosis purified water equipment:

useFully automatic reverse osmosis purified water equipmentSpecial attention should be paid to the pretreatment of raw water. To avoid blockagecounter-infiltration systemRaw water should be pre treated to eliminate suspended solids, reduce turbidity, remove organic matter and chloride ions and other oxides. Due to the high requirements of reverse osmosis for suspended solids in raw water, a pollution index is commonly used to detect water quality based on suspended solids pollution. This method is essentially used to determine the blockage caused by suspended solids in the water in the reverse osmosis system. The pollution index of water entering the reverse osmosis system should not exceed 5, and the recommended value is generally less than 3. The pH value of the influent should also be taken into account during pretreatment. Various semi permeable membranes have their suitable operating pH values, so it is necessary to adjust the pH value of the influent according to the requirements of the reverse osmosis membrane. During pre-treatment, the temperature of the incoming water should also be taken into account. The permeability of the membrane increases with the increase of water temperature, but excessively high temperature can accelerate the hydrolysis rate of cellulose acetate membrane and make the organic membrane softer and easier to compact. Therefore, for organic films, it is generally advisable to control the temperature within the range of about 20-40 ℃, and for composite films, it is advisable to control the temperature within the range of about 5-45 ℃.

Related searches:What is the RO membrane cleaning method in reverse osmosis equipment? Introduction to Treatment Methods for Purified Water Equipment Purified water treatment equipment for the food and beverage industry